Fvil Posted March 26, 2010 Report Share Posted March 26, 2010 Hey people I recently got a bumper bag from Steve heatsink. now I ve got 3 pairs of compounds 2 pair can be cut into the backing shape - but what do i use to cut it with? the other pair is 8mm thick - so do i just glue this straight on a backing? (probably best to glue it on to a backing that has material on it, rite?) thanks alot Quote Link to comment Share on other sites More sharing options...
crispyboy Posted March 26, 2010 Report Share Posted March 26, 2010 Hey people I recently got a bumper bag from Steve heatsink. now I ve got 3 pairs of compounds 2 pair can be cut into the backing shape - but what do i use to cut it with? the other pair is 8mm thick - so do i just glue this straight on a backing? (probably best to glue it on to a backing that has material on it, rite?) thanks alot As theres so much compound (i brought a bumper bag) i just put the compound in and screwed it through with tiny screws works a treat Quote Link to comment Share on other sites More sharing options...
Mark W Posted March 26, 2010 Report Share Posted March 26, 2010 Fresh Stanley blade, Stanley knife, bit of water. Cutting success. Most glues should work fine too I used some cheap Epoxy Resin stuff for my Coust pads and it was decent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.