jimmy95 Posted March 26, 2010 Report Share Posted March 26, 2010 hey guys, just need a little advice with my cranks. i have an onza rip and have just bought some onza t-pro cranks. for some reason the sprocket doesnt seem to be holding on the anything, any advice? james Quote Link to comment Share on other sites More sharing options...
multi tasking male Posted March 27, 2010 Report Share Posted March 27, 2010 its because the rip cranks have a 5 arm mount and the onza tpro cranks have a skrew on crank, you need one of these and a bash ring that will fit http://www.tartybikes.co.uk/product.php?product_id=396&category_id=73 these go up to 22t so you wouldnt have to change the rear spocket, you would need a bash ring to fit aswell http://www.tartybikes.co.uk/product.php?product_id=11077&category_id=1 this is the only bash ring that will fit a 22 or 23t sprocket thats on tartybikes. you might be able to find one some where else but you need a skrew on sprocket and a bashring to fit the sprocket. hope i helped. chris. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.