tdubz Posted March 23, 2010 Report Share Posted March 23, 2010 Hello i currently have a pair of tnn v brake pads with the tnn cnc backings i was looking at maybe som heatink pads or maybe some phatpads next when these wear out can i fit heatsink/phatpads into tnn backings or will i have to buy the whole unit again thanks thomas Quote Link to comment Share on other sites More sharing options...
tdubz Posted March 25, 2010 Author Report Share Posted March 25, 2010 bump Quote Link to comment Share on other sites More sharing options...
psycholist Posted March 25, 2010 Report Share Posted March 25, 2010 I've fitted TNN pads into Heatsink backings, but the TNN ones are slightly longer than heatsinks, so it was just a matter of cutting the pad down a little to fit the backing. Not sure how well it would work the other way around. This was for Magura backings though the V ones take the same pads AFAIK. Quote Link to comment Share on other sites More sharing options...
craigjames Posted March 25, 2010 Report Share Posted March 25, 2010 I run Koxx Brown material in TNN backings, its a relatively easy thing to do. The ends of each bit that insert into the backing need trimming down and maybe the center bit, but thats it, takes about 2 minutes to trim the material from the powerpad backings to fit the TNN cnc backings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.