brad1995 Posted January 24, 2010 Report Share Posted January 24, 2010 hi .. I have trialtech cranks and a tensile freewheel on the crank arm but when i screw it on , before it has chance to reach the back of the crank the teeth things that the bottom bracket tool goes into hit the crank therefore not allowing the frewheel to screw all the way on . I was just woundering if anyone elese has this problem with tenisle freewheels and if any certain spacers are required to go in the gap that is between the freewheel and crank or is it okay how it is . Thanks Quote Link to comment Share on other sites More sharing options...
Revolver Posted January 24, 2010 Report Share Posted January 24, 2010 You need a spacer or a bashring in there. Quote Link to comment Share on other sites More sharing options...
brad1995 Posted January 24, 2010 Author Report Share Posted January 24, 2010 What kind of spacer is needed ? Quote Link to comment Share on other sites More sharing options...
MiuSliS Posted January 24, 2010 Report Share Posted January 24, 2010 Like this one. Quote Link to comment Share on other sites More sharing options...
brad1995 Posted January 24, 2010 Author Report Share Posted January 24, 2010 Quite pricey for a spacer considering i will need about 4, but ahh well whats needed is needed i suppose. Thanks for the help Quote Link to comment Share on other sites More sharing options...
josh barker Posted January 24, 2010 Report Share Posted January 24, 2010 you only need 2 of them to make up the space of a bashring mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.