Revolver Posted January 18, 2010 Report Share Posted January 18, 2010 (edited) Spec: Onza Zoot frame Hope pro II front hub - Sun rhyno lite rim - DMR moto digger tyre Hope team pro II trials - Sun rhyno lite rim - Maxxis high roller -04 magura HS33 lever with fresh products lever blade and braided hose - Tensile 4-bolt booster, using only two bolts - Tensile offset mounts - koxx yellow brake pads Avid BB7 - Shimano XTR lever - Wilko's cable. Ben was right, they're f**king good, somehow. Middleburn cranks - Heatsink cloud 9 bashring - KMC chain DMR v8 pedals Shimano UN52 BB, or UNsomething, it has a plastic shell on one side. Derallieur that bolts onto your axle (need to put the sora on) Echo control forks (I think) Titec stem, it might be 90 or 100 long and maybe 10-15 up NS bikes Jalapeno bars (ok, I just got them cause they had green on them ) FSA orbit headset, I think. Edited January 18, 2010 by Revolver Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted January 18, 2010 Report Share Posted January 18, 2010 Sick! That Tom's old bike? Quote Link to comment Share on other sites More sharing options...
Revolver Posted January 19, 2010 Author Report Share Posted January 19, 2010 Yeah, Tomm. It rides sweet, I dunno why people are so reluctant to buy them. Quote Link to comment Share on other sites More sharing options...
Borgschulze Posted January 19, 2010 Report Share Posted January 19, 2010 Where can I get that lever blade? Quote Link to comment Share on other sites More sharing options...
Revolver Posted January 19, 2010 Author Report Share Posted January 19, 2010 PM Todge on here about them, he's the guy who makes em. Dunno if he has any though. £30 I think. Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted January 19, 2010 Report Share Posted January 19, 2010 Yeah, Tomm. It rides sweet, I dunno why people are so reluctant to buy them. Not sure, they are beast. Most folks want a seat though. And they are a little heavier. Quote Link to comment Share on other sites More sharing options...
Sidehop Stuart Posted January 19, 2010 Report Share Posted January 19, 2010 Looks sweet. Both sides of the frame is a different colour Quote Link to comment Share on other sites More sharing options...
Liamlikesonza Posted January 21, 2010 Report Share Posted January 21, 2010 Looks sweet. Both sides of the frame is a different colour I am so stupid I only just realised after you said that Quote Link to comment Share on other sites More sharing options...
Skoze Posted January 21, 2010 Report Share Posted January 21, 2010 What happened to the Leeson, Jeff? Looks mighty fine, well played Quote Link to comment Share on other sites More sharing options...
padarik Posted January 21, 2010 Report Share Posted January 21, 2010 what happenned to inspired with the king????? Quote Link to comment Share on other sites More sharing options...
Revolver Posted January 21, 2010 Author Report Share Posted January 21, 2010 Looks sweet. Both sides of the frame is a different colour Hahaha, it's true. It's Tomm's old frame, so his handiwork. I sorta want to raw it, but it's a shame to waste something this unique. What happened to the Leeson, Jeff? Looks mighty fine, well played Well, the story goes - I had that leeson, and took it to bunny. I rode Flipp's zoot, and realised I could ride that better, I sold flipp the frame, and bought this zoot from Tomm. I can do all the spinny tricks I could on the leeson on this. I used to be able to manual it just as well, but I'm out of practise. what happenned to inspired with the king????? As above, except for - swapped that for the leeson I prefer this, even though they're nearly the same geo. Quote Link to comment Share on other sites More sharing options...
cai Posted January 22, 2010 Report Share Posted January 22, 2010 (edited) Good to see some seatless 24"s being used, I'm sick of seeing all these Inspireds, Marino's and Heatsink's with un-useable seats After seeing your bike I decided to build up the Zoot frame I had lying around, so I put all the components from my 24UK onto the Zoot. And god does it ride nice, these frames are lush! I find them so 'trialsy' compared to my Heatsink which was a little street beast. EDIT: I really want to spray my frame black and white now Edited January 22, 2010 by cai Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted January 22, 2010 Report Share Posted January 22, 2010 Good to see some seatless 24"s being used, I'm sick of seeing all these Inspireds, Marino's and Heatsink's with un-useable seats After seeing your bike I decided to build up the Zoot frame I had lying around, so I put all the components from my 24UK onto the Zoot. And god does it ride nice, these frames are lush! I find them so 'trialsy' compared to my Heatsink which was a little street beast. EDIT: I really want to spray my frame black and white now Do something a little different though. No one really wants a bike that looks the same as someone else. Quote Link to comment Share on other sites More sharing options...
cai Posted January 24, 2010 Report Share Posted January 24, 2010 Do something a little different though. No one really wants a bike that looks the same as someone else. Im thinking Zebra stripes Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted January 24, 2010 Report Share Posted January 24, 2010 Im thinking Zebra stripes Heck yeah! I quite like the fade on my zhi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.