Stem Choice? On A Stock!

[bigamac]

Right im coming back to trials again after a 6 month break aha.

I'm buying a simtra build off my mate, lovely spec and i'll post into bike pictures once i got it.

But the stem on it atm is too high for me i think, so im after advice for waht is a good one to get

it's a tryall nuc stem, and tryall riser bars.

Advice?

Also if you have one going forsale then pm me!

but i don't have money un-till 29th (:

Any freebies are helpful (;

[Rusevelt]

Both stem and risers are fine, no need to change them.

[bigamac]

Both stem and risers are fine, no need to change them.

I just find it abit to high, i'm not used to a stock because i used to ride mod.

But when i rode other peoples stocks then it didn't feel this high up

but could be the geo of the frame?

[onzatrip]

The bar and stem combo are fine but if you dont like that high change the stem to a echo 130*15 will ride mint

[bigamac]

The bar and stem combo are fine but if you dont like that high change the stem to a echo 130*15 will ride mint

Shall bear that in mind, gonna stick with this combo when i get it, but change after i given it a proper riding (:

I want this bike now!

[ogre]

simtras only a +20 bb so bars will feel higher than if you've dabbled on other stocks with more bb rise (this is purely a guess that you've only tried higher bb stocks before cause there more popular) and you'll feel more at home with more bb rise cause the geo feels more like a mod, ride it and give it a go before you dick about changing it

[Gandalf the Yellow]

i don't think you should change it. give it a proper ride first (not just a 5 mins hopping about session), you might just get used to it and save yourself some money.

chances are if you're riding trials again it'll be a little fresh and stock and different geo is easier to adapt to.

steve