Rob. Posted December 31, 2009 Report Share Posted December 31, 2009 can u fit bash ring on monty 221ti crank Quote Link to comment Share on other sites More sharing options...
BigAl Posted December 31, 2009 Report Share Posted December 31, 2009 Yes. Quote Link to comment Share on other sites More sharing options...
Simpson Posted January 1, 2010 Report Share Posted January 1, 2010 Yes. Quote Link to comment Share on other sites More sharing options...
Ali C Posted January 1, 2010 Report Share Posted January 1, 2010 I am going to go against the grain and say no. Those cranks don't have many threads, so by using a bash ring, you risk stripping the crank. You maaaay get away with a thin trialtech ti bash, they are about 3mm thick. Best bet is to put a bash on (or something to the same thickness) and count how many threads you have left, 7 threads should be enough to hold without stripping. Quote Link to comment Share on other sites More sharing options...
Jack Chaperz Posted January 1, 2010 Report Share Posted January 1, 2010 i ran ti cranks with Neon Light Bashring which is, i think 4mm wide Quote Link to comment Share on other sites More sharing options...
walker Posted January 2, 2010 Report Share Posted January 2, 2010 I've got a 231ti bash ring (the newest halfring one) kicking about and its even thinner than the Trialtech Ti ring, you might get away with it. But I dont suppose you will be able to get hold of one easily, I've not seen them for sale anywhere. Personally I would go for stronger cranks. The 221ti cranks are the only cranks that I have ever snapped! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.