crispyboy Posted December 28, 2009 Report Share Posted December 28, 2009 How do you get it out and replace with a new one ?I can bleed again thats not a problem just need to know how to get it out Quote Link to comment Share on other sites More sharing options...
Mark W Posted December 28, 2009 Report Share Posted December 28, 2009 Pretty sure you need a special tool for it to get the bushing thing out, or something like that - I needed to replace a push-rod on my Mini lever but Ads said we didn't have the right tool for the job, so that was that... Quote Link to comment Share on other sites More sharing options...
MadNick1.2 Posted December 28, 2009 Report Share Posted December 28, 2009 It is pretty simple.The only specific tool which will make it a million times easy is a pair of circlip pliers to remove the Circlip which retains the seal and pushrod.These will do the job Linky Link Quote Link to comment Share on other sites More sharing options...
Matt Vandart Posted December 28, 2009 Report Share Posted December 28, 2009 Mad nick is correct, it is a real pisser to get that circlip out even with pliers cos the holes are just hidden in the slot. Quote Link to comment Share on other sites More sharing options...
Duncy H Posted December 28, 2009 Report Share Posted December 28, 2009 The circlip pliers make life a lot easier but when replacing mine I didn't have any. All I had was some needle nose type pliers which i shaped with an angle grinder and it came out ok. Quote Link to comment Share on other sites More sharing options...
George.E Posted December 28, 2009 Report Share Posted December 28, 2009 I took mine out with a tiny screw driver and just wiggled about to get the clips off.Wasn't to hard like.Just kind of flick the clip off with the screw driver an there you go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.