craigjames Posted December 12, 2009 Report Share Posted December 12, 2009 Just transferred some koxx brown material to some TNN CNC backings that i have, had to glue the material in with some epoxy and shoved them in the oven to go off. I didn't try them before, but they wont clip over the nipple on the pistons. any ideas?Secondly i bought some trialtech single speed spacers a month or so ago and finally got round to trying them, removed all the burrs on the freehub body, used a rubber mallet to try tapping the first one on, but they just wont go on. Tried them on a different rear King, Pro2, and a few other hubs i have in the garage and none of them fit, has this happened to anyone else? Quote Link to comment Share on other sites More sharing options...
Borat Posted December 12, 2009 Report Share Posted December 12, 2009 Just transferred some koxx brown material to some TNN CNC backings that i have, had to glue the material in with some epoxy and shoved them in the oven to go off. I didn't try them before, but they wont clip over the nipple on the pistons. any ideas?Secondly i bought some trialtech single speed spacers a month or so ago and finally got round to trying them, removed all the burrs on the freehub body, used a rubber mallet to try tapping the first one on, but they just wont go on. Tried them on a different rear King, Pro2, and a few other hubs i have in the garage and none of them fit, has this happened to anyone else?Prob 1: Yeah, but a little wd40 on the pistons, mine has/had this problem.Yeah, I briefly renember people having size difficulties with the t-tech hub spacers, email or ring the tart tmrw mate.Hope I have helped at all. Quote Link to comment Share on other sites More sharing options...
josh barker Posted December 12, 2009 Report Share Posted December 12, 2009 (edited) did you cut a square shape in the koxx material where the clip goes nere??EDIT:oh sorry it wasnt this you was looking for Edited December 12, 2009 by josh barker Quote Link to comment Share on other sites More sharing options...
craigjames Posted December 12, 2009 Author Report Share Posted December 12, 2009 Prob 1: Yeah, but a little wd40 on the pistons, mine has/had this problem.Yeah, I briefly renember people having size difficulties with the t-tech hub spacers, email or ring the tart tmrw mate.Hope I have helped at all. Should have thought of that myself, will give it a crack.At least i'm not the only one, will ring Tarty tomorrow, cheers did you cut a square shape in the koxx material where the clip goes nere??Yup i have indeeds.If no joy with lubing the nipple i'll let you know. Quote Link to comment Share on other sites More sharing options...
that NBR dude Posted December 12, 2009 Report Share Posted December 12, 2009 will ring Tarty tomorrow, cheers I'd wait until Monday personally Craig. You might be ringing for a while otherwise Quote Link to comment Share on other sites More sharing options...
craigjames Posted December 12, 2009 Author Report Share Posted December 12, 2009 I'd wait until Monday personally Craig. You might be ringing for a while otherwise I've got all day, but yeah might be an idea to wait until Monday Cheers Andy.Pads sorted,although not sitting flush with the piston. Quote Link to comment Share on other sites More sharing options...
hdmackay Posted December 12, 2009 Report Share Posted December 12, 2009 I've got all day, but yeah might be an idea to wait until Monday Cheers Andy.Pads sorted,although not sitting flush with the piston.What i find best is to put water in the o-ring, then push the pads on as far as you can wih your hands, then set-up your brake and squeeze the lever really hard. Will do the trick. Quote Link to comment Share on other sites More sharing options...
trialsmax04 Posted December 12, 2009 Report Share Posted December 12, 2009 ive just bought some hope cassette spacers as tarty advised me not to get the trial tech mods as the tolerance on the trial tech spacers is quite low. Dont really know what hub there for. Quote Link to comment Share on other sites More sharing options...
ogre Posted December 13, 2009 Report Share Posted December 13, 2009 i had to force my trialtech spacers on, but my casette is a bit f**ked anyway, anyone know how much they are to replace? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.