BlueSmokeyJoe Posted December 9, 2009 Report Share Posted December 9, 2009 Hi guys, I have a 60 click tensile freewheel that I need to service. I've looked on Tarty and they say the lockring has a 'right hand' thread. Would I be right to assume this is the same as a normal bottle top, 'righty, tighty....' or not?Basically, when looking at the freewheel with the ''Tensille FF'' logo at the top, which way does the lockring need to go, to loosen it?I know this is a pretty noob question but I'd rather ask than knacker a good freewheel lol Cheers! Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted December 9, 2009 Report Share Posted December 9, 2009 Right hand thread = anticlockwise to undo: Quote Link to comment Share on other sites More sharing options...
DannyBazz (: Posted December 9, 2009 Report Share Posted December 9, 2009 Right hand thread = anticlockwise to undo: Use a nail/punch and a hammer, they're generally pretty tight.. or most of mine were anyway Quote Link to comment Share on other sites More sharing options...
BlueSmokeyJoe Posted December 9, 2009 Author Report Share Posted December 9, 2009 Cheers Adam! Quote Link to comment Share on other sites More sharing options...
LukasMcNeal Posted December 10, 2009 Report Share Posted December 10, 2009 Right hand thread = anticlockwise to undo: Mooo! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.