Fvil Posted November 4, 2009 Report Share Posted November 4, 2009 Hey everyoneJust got a new frame (echo lite 09) I m tryin to put a my bash plate on (Echo lite) it but atm its really really tight! surly this isnt good for the frame?thanks Quote Link to comment Share on other sites More sharing options...
George.E Posted November 4, 2009 Report Share Posted November 4, 2009 Wack a bit of oli in the threads that should help, don't force it, you should no if its going to go in or not, mines quite tight but you can tell if its going in right.Hope this may come to some use. Quote Link to comment Share on other sites More sharing options...
trialsmax04 Posted November 4, 2009 Report Share Posted November 4, 2009 You need to put the two rear bolts in first, about 3 turns each. And then bend the plate do you can put the top bolt in Make sure you have a rubber between the frame! Quote Link to comment Share on other sites More sharing options...
Fvil Posted November 4, 2009 Author Report Share Posted November 4, 2009 yer I think i need to make the rubber smaller.but i ve now rounded the front bolt where can i get another one? Quote Link to comment Share on other sites More sharing options...
hdmackay Posted November 4, 2009 Report Share Posted November 4, 2009 Bashplate boltsM6 x 20. Quote Link to comment Share on other sites More sharing options...
Echo-Scott Posted November 4, 2009 Report Share Posted November 4, 2009 Dont really need a bashplate unless your planning on hammering your frame. Just run a Bashring and you'll be fine. Just dont go trying to get to bash off a 7ft wall or something.(Plus no bashplate is lighter, If your into that kind of thing ) Quote Link to comment Share on other sites More sharing options...
Fvil Posted November 5, 2009 Author Report Share Posted November 5, 2009 Yer i know...dont really care about weight,just dont want to spend more moneys on it Another questionI got this spacer ring from my new cranks, Whats that spacer for? Quote Link to comment Share on other sites More sharing options...
WIGAN Posted November 5, 2009 Report Share Posted November 5, 2009 Yer i know...dont really care about weight,just dont want to spend more moneys on it Another questionI got this spacer ring from my new cranks, Whats that spacer for?if you dont run a bash ring the spacer goes where the bash would be so no threads are exposed to any damage Quote Link to comment Share on other sites More sharing options...
Fvil Posted November 5, 2009 Author Report Share Posted November 5, 2009 oh so i still use it with a Front Freewheel Quote Link to comment Share on other sites More sharing options...
Echo-Scott Posted November 5, 2009 Report Share Posted November 5, 2009 oh so i still use it with a Front Freewheel Aslong as theres no bashring being used, Then yes. Quote Link to comment Share on other sites More sharing options...
Fvil Posted November 5, 2009 Author Report Share Posted November 5, 2009 (edited) sweet thanks Also, I m making the rubber smaller. will that be ok?(because the bashplate isnt fitting very well ) Edited November 5, 2009 by Fvil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.