liam1992 Posted September 19, 2009 Report Share Posted September 19, 2009 This may help some people not sure, but i bought some hs33 clamps from selectbikes.com and they sent them with 20mm long bolts. Now this may only be the case with zoo piranah frames, but the bolts dont go into the 4 bolt mounts far enough so it threads about 1-2mm of the 4 bolt mounts so i had to buy 25mm long bolts. As i said it may not help many people but thought i would let you all know. Quote Link to comment Share on other sites More sharing options...
noname Posted September 19, 2009 Report Share Posted September 19, 2009 Thanks a lot mate! Quote Link to comment Share on other sites More sharing options...
RossMcd Posted September 19, 2009 Report Share Posted September 19, 2009 Deng bolts have always been crap to be honest.. Better off buying new ones before even trying the standard deng ones.. Quote Link to comment Share on other sites More sharing options...
George.E Posted September 19, 2009 Report Share Posted September 19, 2009 Deng bolts have always been crap to be honest.. Better off buying new ones before even trying the standard deng ones..True, I bought some longer ones from Halfords, much better, less chance of me stripping the thread. Quote Link to comment Share on other sites More sharing options...
gage-mann Posted September 19, 2009 Report Share Posted September 19, 2009 should'nt try put a store down really (if thats what your trying) mate there supplying you with what they purchased from deng, thats how they get it and sell it, and yea they arnt too long Quote Link to comment Share on other sites More sharing options...
Muel Posted September 19, 2009 Report Share Posted September 19, 2009 Select just sell packets of stuff, it Deng supply the packets with the wrong bolts, that's their problem. They're only cheapo shit anyway, I replaced mine with all stainless ones with a plain shank that almost reached the top of the 4 bolt mounts, so the threads didn't dig into the inside of the clamps. (Was making a right mess of them).I'd say you should get some plain shank bolts that fit and cut them down, so you get the maximum amount of thread inside the frame. This also makes the set-up slightly stiffer aswell as reducing the risk of you stripping the threads. Quote Link to comment Share on other sites More sharing options...
liam1992 Posted September 19, 2009 Author Report Share Posted September 19, 2009 should'nt try put a store down really (if thats what your trying) mate there supplying you with what they purchased from deng, thats how they get it and sell it, and yea they arnt too longIf you read what i said i am not trying to put the shop down or slag off anyone. Just to warn others. Quote Link to comment Share on other sites More sharing options...
George.E Posted September 19, 2009 Report Share Posted September 19, 2009 If you read what i said i am not trying to put the shop down or slag off anyone. Just to warn others. It does kind of though by the way your putting it, just be careful of what you say . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.