Jump to content

Bleeding A Magrura Clara?


Little Yoshi

Recommended Posts

Dot 5.1...

And with the magura disc brakes... you bleed them from the back. Its the same bleed bolt as a magura, so fill your syringe up, and screw the bolt into the bleed hole on the piston.

Pump it all through, fill the reservoir to the top, then ROLL your Diaphram (little rubber seal under res. cap) on.

Bleed done :)

Link to comment
Share on other sites

Dot 5.1...

And with the magura disc brakes... you bleed them from the back. Its the same bleed bolt as a magura, so fill your syringe up, and screw the bolt into the bleed hole on the piston.

Pump it all through, fill the reservoir to the top, then ROLL your Diaphram (little rubber seal under res. cap) on.

Bleed done :)

Magura does not use dot oil, it is mineral oil same as in HS33s. You will ruin the brake by bleeding it with dot oil.

LINKY

Edited by 3dd
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...