tom@eastcoasttrials Posted August 15, 2009 Report Share Posted August 15, 2009 i have been finidng my high roller keeps popping off the rim would this happend if i run a too low psi ??advice will me much helped thanks Quote Link to comment Share on other sites More sharing options...
LordMersey Posted August 15, 2009 Report Share Posted August 15, 2009 sounds like you've got a "creeper" how old is your rim? Quote Link to comment Share on other sites More sharing options...
Borat Posted August 15, 2009 Report Share Posted August 15, 2009 i have been finidng my high roller keeps popping off the rim would this happend if i run a too low psi ??advice will me much helped thanksWhat rim and how old is the tyre? Quote Link to comment Share on other sites More sharing options...
tom@eastcoasttrials Posted August 15, 2009 Author Report Share Posted August 15, 2009 echo tr like 3 months old and the tyre is oki not had it tht long 2 months maybe Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted August 15, 2009 Report Share Posted August 15, 2009 what size tube are you using just of curiosity? if its one of those fat 3" things then change that and see if it continues Quote Link to comment Share on other sites More sharing options...
tom@eastcoasttrials Posted August 15, 2009 Author Report Share Posted August 15, 2009 what size tube are you using just of curiosity? if its one of those fat 3" things then change that and see if it continues ash im using a 2.2 tube i have tryed diff tubes and it still does it :@ pissing me off now every ride pop off comes one side of my tyer Quote Link to comment Share on other sites More sharing options...
DannyBazz (: Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) . Edited August 16, 2009 by DannyBazz (: Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted August 16, 2009 Report Share Posted August 16, 2009 I heard alot of the echo tyres pop of the rim...Most deng tyres, brake mounts, brakes... all shit.The brake mounts aren't the same size as maggie ones... therefore they chew up the plastic washers..To my knowledge echo have never made tyres ( just re-branded that Luna pile a few years back ) the brake mounts are awesome, id never go back to magura mounts....they seem to clamp far more securely. The brakes have had issues, although i think they're nearly sorted now?Sounds like the rim is too small, or something to do with the inner-tube. Orgun Donor runs that exact setup with no real problems, so i can only assume its the tube at fault Quote Link to comment Share on other sites More sharing options...
tom@eastcoasttrials Posted August 16, 2009 Author Report Share Posted August 16, 2009 changed the tube to a 2.1 and still keeps happening !! going to buy a new rim soon this is starting to tick me off Quote Link to comment Share on other sites More sharing options...
ScottTrials Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) changed the tube to a 2.1 and still keeps happening !! going to buy a new rim soon this is starting to tick me offIs your wheel egged or buckled. I had the same problem when i was riding stock and what psi are you running at? Edited August 16, 2009 by ScottTrials Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted August 17, 2009 Report Share Posted August 17, 2009 Before you buy a new rim, try a different tyre on the back just to be sure Quote Link to comment Share on other sites More sharing options...
psycholist Posted August 17, 2009 Report Share Posted August 17, 2009 Try running more pressure in the tyre and focus on landing on the tyre as straight as possible. If you land at enough of an angle you'll unseat most tyres, but higher tyre pressure definitely helps. Try a different tyre too just in case you have a particularly loose one, rims are usually the right size... Quote Link to comment Share on other sites More sharing options...
Mat Smith!! Posted August 17, 2009 Report Share Posted August 17, 2009 To my knowledge echo have never made tyres ( just re-branded that Luna pile a few years back ) the brake mounts are awesome, id never go back to magura mounts....they seem to clamp far more securely. The brakes have had issues, although i think they're nearly sorted now?Sounds like the rim is too small, or something to do with the inner-tube. Orgun Donor runs that exact setup with no real problems, so i can only assume its the tube at fault Quote Link to comment Share on other sites More sharing options...
Nickkkkk Posted August 17, 2009 Report Share Posted August 17, 2009 check the lip of the tyre for damage, happened to me a few months ago... Quote Link to comment Share on other sites More sharing options...
Ryan. Posted August 17, 2009 Report Share Posted August 17, 2009 Quote Link to comment Share on other sites More sharing options...
mr_malcolm Posted August 17, 2009 Report Share Posted August 17, 2009 Have you checked the tyre you could of damaged the bead round the edge if you have it will keep doing this over and over. Check it, if its a bit damaged/excesivly worn in an area replace the tyre. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.