forteh Posted June 1, 2009 Report Share Posted June 1, 2009 Think 3/16" might be a bit small for plummers, LBS should have something to suit though, its about the size of most loose ball headset bearings Will have to fertilize you some other time! Quote Link to comment Share on other sites More sharing options...
Balman Posted June 15, 2009 Report Share Posted June 15, 2009 option four stamp on the face of the one who did it? wont fix it but you'll feel better. Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 15, 2009 Report Share Posted June 15, 2009 Get an old 03/04 lever and grind it down to the extent that you are just left with the cylinder it self. Then put that magura cylinder in the RB carbon housing.Win. + the cylinder will never leak like the RB ones.I saw someone do that many moons ago. Quote Link to comment Share on other sites More sharing options...
Ben John-Hynes Posted June 15, 2009 Report Share Posted June 15, 2009 Use the 04 one you have with the RB blade. And sell the RB lever for a massive amount. win win Quote Link to comment Share on other sites More sharing options...
.mitch Posted June 16, 2009 Report Share Posted June 16, 2009 It'll probably inevitably leak anyway, even if you replace the ball bearing that drops in there.If you graft it onto the older style lever body, you might have a bit more luck with that. Quote Link to comment Share on other sites More sharing options...
Simpson Posted June 16, 2009 Author Report Share Posted June 16, 2009 Get an old 03/04 lever and grind it downIf you saw my bare skills with an angle grinder you wouldn't have even suggested that, I tryed *trimming* a bash the other day, misjudged it and cut it in half. Use the 04 one you have with the RB blade. And sell the RB lever for a massive amount. win winYea well i realised that I kinda brought 3 maggies to put on my mod so just gonna keep the RB spare till i need it on a rainy day and use the lever in an 04 body Quote Link to comment Share on other sites More sharing options...
cai Posted June 16, 2009 Report Share Posted June 16, 2009 Get an old 03/04 lever and grind it down to the extent that you are just left with the cylinder it self. Then put that magura cylinder in the RB carbon housing.Thats a bit extreme, when you can just poke an allen key through the bleed hole and push the cylinder out ..saves killing a classic lever body. Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 16, 2009 Report Share Posted June 16, 2009 Thats a bit extreme, when you can just poke an allen key through the bleed hole and push the cylinder out ..saves killing a classic lever body.You've got the wrong end of the stick lad.Grind out the whole cylinder not the piston. Quote Link to comment Share on other sites More sharing options...
cai Posted June 16, 2009 Report Share Posted June 16, 2009 Ah, then put the 'grinded out bit' into the clamping area of the RB lever? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.