Daniel C Posted May 29, 2009 Report Share Posted May 29, 2009 Hi i have recently got new bars but there really short, so i would like to put bar extenders in.how would i go about making bar extenders? what meterial?any help would be appreciated.cheers Quote Link to comment Share on other sites More sharing options...
hdmackay Posted May 29, 2009 Report Share Posted May 29, 2009 One of my mates got two bits of wood, cut them to size, and hammered them in to each side. Quote Link to comment Share on other sites More sharing options...
Muel Posted May 29, 2009 Report Share Posted May 29, 2009 I've done that several times, works great. Just wrap tape round to make them the same width as the bar. Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted May 29, 2009 Report Share Posted May 29, 2009 One of my mates got two bits of wood, cut them to size, and hammered them in to each side. Two bits of wood sandy two bits of wood look at me shoes aren't they shiny? Come over here sandy put your hand in me pocket guess what's in my pocket. I'm winding a coat hanger around my finger. Have I won? Have I won?If anyone knows what that's off they get a prize. Quote Link to comment Share on other sites More sharing options...
Skoze Posted May 29, 2009 Report Share Posted May 29, 2009 My old Monty bars were extended to just under 30" by using off-cuts from old bars, with a thinner diameter tube on the inside of them, jammed into the bar. Worked f**king well! Quote Link to comment Share on other sites More sharing options...
Luke Rainbird Posted May 30, 2009 Report Share Posted May 30, 2009 My old Monty bars were extended to just under 30" by using off-cuts from old bars, with a thinner diameter tube on the inside of them, jammed into the bar. Worked f**king well!Yep, couldn't pull them out so had to grind the extension off! Quote Link to comment Share on other sites More sharing options...
pablotrial Posted May 30, 2009 Report Share Posted May 30, 2009 i had that problem to, just use broomstick its barely the same withd than the handlebar,smooth it to fit the inside of the bar anr hammer it inside , i used that and was very good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.