Rob. Posted May 23, 2009 Report Share Posted May 23, 2009 How do i take my tensile freewheel of with out a freewheel tool?Merci!Rob. Quote Link to comment Share on other sites More sharing options...
r2wtrials Posted May 23, 2009 Report Share Posted May 23, 2009 BB tool. Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted May 24, 2009 Report Share Posted May 24, 2009 and if you havent got that ^^ well angle grind it to 3-4 pieces and pull them off...Basically you need the tool Quote Link to comment Share on other sites More sharing options...
Leistonbmx Posted May 24, 2009 Report Share Posted May 24, 2009 Your LBS will have one. Quote Link to comment Share on other sites More sharing options...
*Koxx hydroxx 2 Jack * Posted May 24, 2009 Report Share Posted May 24, 2009 you can always use a hammer and a punch , just put the punch in the grove where you would put the freewheel remover tool and smack it hard , i would only advise this if you were throwing it away after , it totaly mucks up the freewheel tool slots , and you wont be able to use the propper tool on it again . Quote Link to comment Share on other sites More sharing options...
LiamWood! Posted May 24, 2009 Report Share Posted May 24, 2009 (edited) A tensile uses a bb tool so using a punch and hammer will do nothing and be a waste of time and effot.If youhavent got a bb tool and it to your local bike shop they should sort you out for few quid or even free. Edited May 24, 2009 by LiamWood! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.