Adrian Posted May 21, 2009 Report Share Posted May 21, 2009 ok, so it came with a washer thing, for starters do i put it in or not? (run an 07 gu btw) and if so, which side?cheers Quote Link to comment Share on other sites More sharing options...
16 years later Posted May 21, 2009 Report Share Posted May 21, 2009 (edited) Whats the shell width of the frame, you can measure it it’ll be 68mm or 73mm. Measure the frame across where the BB goes.If it's 68mm the hard metal washer goes on the drive side and the bendy ring goes on the non drive side. If it's 73mm then you don’t put either on, and the non drive side cup will not sit flush to the frame (few mm out)It says all this in the instructions. Edited May 21, 2009 by 16 years later Quote Link to comment Share on other sites More sharing options...
Mat Smith!! Posted May 21, 2009 Report Share Posted May 21, 2009 Run the rubber washer on the none drive and the metal one on the drive. Quote Link to comment Share on other sites More sharing options...
WIGAN Posted May 21, 2009 Report Share Posted May 21, 2009 Run the rubber washer on the none drive and the metal one on the drive.bint strikes again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.