Duncy H Posted January 14, 2009 Report Share Posted January 14, 2009 Right the crank has worn away and is getting more tham annoying now. Of coarse I need a new one (just left) but the only one like it is one off tarty.Could you please compare mine in the pic with the one on tarty and tell me if it will be ok.http://www.tartybikes.co.uk/product.php?pr...;category_id=11Cheers Duncan Quote Link to comment Share on other sites More sharing options...
N.Wood Posted January 14, 2009 Report Share Posted January 14, 2009 If you have a square taper bottom bracket then yeah it will be fine. Quote Link to comment Share on other sites More sharing options...
Duncy H Posted January 14, 2009 Author Report Share Posted January 14, 2009 If you have a square taper bottom bracket then yeah it will be fine.Cheers matey I will get one ordered quick time. Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted January 14, 2009 Report Share Posted January 14, 2009 Hold your horses. You need to take the crank bolt out and make sure the square is at the same angle as the crank you are going to get. Sometimes they are offset. Quote Link to comment Share on other sites More sharing options...
N.Wood Posted January 14, 2009 Report Share Posted January 14, 2009 Didn't think of that - Had a look but none of the newer cranks in that style are available in square so couldn't check. Quote Link to comment Share on other sites More sharing options...
Duncy H Posted January 14, 2009 Author Report Share Posted January 14, 2009 Hold your horses. You need to take the crank bolt out and make sure the square is at the same angle as the crank you are going to get. Sometimes they are offset. Ooops well it had better be alrite cus i have ordered it now Dont suppose it would be different with it being monty and all that jazz. Quote Link to comment Share on other sites More sharing options...
forteh Posted January 15, 2009 Report Share Posted January 15, 2009 Hold your horses. You need to take the crank bolt out and make sure the square is at the same angle as the crank you are going to get. Sometimes they are offset.The taper will be JIS (same as shimano and 90% of mtb cranks) I think its only campag that uses a different taper; especially as its monty it will be fine Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted January 15, 2009 Report Share Posted January 15, 2009 The taper will be JIS (same as shimano and 90% of mtb cranks) I think its only campag that uses a different taper; especially as its monty it will be fine erm onza / ddg muscleman cranks, the point of the taper is at 90* to the arm, whereas on t-bird cranks, for rxample, it is at 45*...id assume as these are both monty it'd fit though im aure tarty'll take it back if it doesn though Quote Link to comment Share on other sites More sharing options...
forteh Posted January 15, 2009 Report Share Posted January 15, 2009 erm onza / ddg muscleman cranks, the point of the taper is at 90* to the arm, whereas on t-bird cranks, for rxample, it is at 45*...Ah right gotcha, thinking of the wrong end of the stick Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted January 15, 2009 Report Share Posted January 15, 2009 erm onza / ddg muscleman cranks, the point of the taper is at 90* to the arm, whereas on t-bird cranks, for rxample, it is at 45*...id assume as these are both monty it'd fit though im aure tarty'll take it back if it doesn thoughYeah thats what I meant but couldn't explain it properly lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.