Jump to content

Pc Pics - Post A Pic Of You Pc


maxxis26

Recommended Posts

Less stats more photos! I need some inspiration to get off my arse and fix my computer. About a month ago my motherf**kingboard filled my room with the smoke and a nice smell of burning plastic.

I've not bothered to buy a new one yet but I'm sure if its actually worth doing as most probably other components have blown too....and then I'll just be a waste of money. May as well buy a bigger monitor and a decent laptop...

Link to comment
Share on other sites

Lian Li PC-A05A

Abit FNP-IN9 Fatality

Intel e6600 @3.2GHz

Zalman CNP-8000 CPU cooler

4GB Corsair PC5400 ram @667

Gainward 9800GTX+

Creative Audigy ZS 2

3x Western Digital Caviar 500GB drives

Corsair HX520w PSU

Samsung DVD+/- ReWriter (IDE -WTF?! - needs replacing with something SATA)

Low 30s idle and low 50s loaded. Nothing special in SuperPi about 18 seconds for the 1M mark.

2vbouue.jpg

2iqgw9s.jpg

34qms95.jpg

Will probably get some new fans as the standard Lian Li fans are getting tired.

Link to comment
Share on other sites

Regular kettle leading to the back under the fan, then inside the case there's a cables which runs along the bottom and comes out the front, where the PSU is attached to a tray/thing.

Front panel lifts off and gives you access to the PSU and whatnot.

fc7m8j.jpg

23krywj.jpg

Link to comment
Share on other sites

  • 5 months later...

Though I would revive this thread to show you my handy work :P

Basically tidied it up, sprayed parts and got new bits! Woop

post-1410-1250350440_thumb.jpg

post-1410-1250350434_thumb.jpg

Though since these pic I now have new ram, a new sound card and a new processor (not that you can see that obviously)

Link to comment
Share on other sites

Though I would revive this thread to show you my handy work :P

Basically tidied it up, sprayed parts and got new bits! Woop

post-1410-1250350440_thumb.jpg

post-1410-1250350434_thumb.jpg

Though since these pic I now have new ram, a new sound card and a new processor (not that you can see that obviously)

Specs??

Link to comment
Share on other sites

Though I would revive this thread to show you my handy work :P

Basically tidied it up, sprayed parts and got new bits! Woop

Snaps

Though since these pic I now have new ram, a new sound card and a new processor (not that you can see that obviously)

:lol: You've jsut made me feel so bad; mine's a mess in comparison:

InsideTower.jpg

It is slightly better than that now (i.e. the 12v connector's plugged into the GPU) and I taped and wrapped some wires together to keep them away from fans.

Link to comment
Share on other sites

Specs??

Q9550 @3.9 cooled with TRUE using xigmatek fans

Asus P5Q Pro

9800gt AMP (overclocked version basically)

4gig OCZ Reaper 1066mhz @ 1200 (I think)

Samsung 2433bw 24"

Coolermaster 700w silent pro modular psu.

And a crappy wizard wi20a case which I have modded to make half decent :P

Edited by Wrayvon
Link to comment
Share on other sites

Q9550 @3.9 cooled with TRUE using xigmatek fans

Asus P5Q Pro

9800gt AMP (overclocked version basically)

OCZ Reaper 1066mhz @ 1200 (I think)

Samsung 2433bw 24"

Coolermaster 700w silent pro modular psu.

And a crappy wizard wi20a case which I have modded to make half decent :P

Nice, that CPU fan looks absolutely HUGE!

Link to comment
Share on other sites

Thats during a full load test that it gets to 50. Using prime95. Try it, thats one way to find out if it runs stable after you've overclocked.

EDIT: Looking at your pics, are your graphics cards not really really hot during use? The air flow towards your cards doesn't look too great, surprised they havn't overheated already! I.E Sort those cables out :P

Actually I just noticed the fan on your case door, that will help a lot I imagine! :) I used to have one on mine, but I had to remove it as I couldn't shut the door with that heatsink being so big....

Edited by Wrayvon
Link to comment
Share on other sites

Thats during a full load test that it gets to 50. Using prime95. Try it, thats one way to find out if it runs stable after you've overclocked.

EDIT: Looking at your pics, are your graphics cards not really really hot during use? The air flow towards your cards doesn't look too great, surprised they havn't overheated already! I.E Sort those cables out :P

Actually I just noticed the fan on your case door, that will help a lot I imagine! :) I used to have one on mine, but I had to remove it as I couldn't shut the door with that heatsink being so big....

There's 2 fans going in from the front of the case, one going in on the top of the case to RAM and CPU, one out at the back and the one on the case door is actually going out as well. I find the 3 fans going in (all 120mm) enough to be honest. And graphics cards don't seem to get that hot either. I turn up their fan speeds when playing some intensive games, air feels pretty cool coming out the back of them.

Link to comment
Share on other sites

Though I would revive this thread to show you my handy work :P

Basically tidied it up, sprayed parts and got new bits! Woop

Though since these pic I now have new ram, a new sound card and a new processor (not that you can see that obviously)

That an Ashdown EB12-180 I spy in the background of the second pic?

Link to comment
Share on other sites

heres mine:

100_2724.jpg\

Specs:

AMD Phenom 2.2GHz

700watt PSU

4GB OCZ Sli RAM

two 9500GT 1GB video cards. (paid less then 100 bucks for 2.)

1TB internal HDD with a 250GB and a 160GB external

Win XP and Win 7 RC

and my portable devices, laptop, archos 604wifi, cell phone, and my old crapy one with the duct tape that i blew up.

100_2936.jpg

Laptop Specs:

Pentium M @ 1.7GHz

1.25GB RAM

60GB HDD

32MB Nvidia 5200FX

Win XP with Ubuntu virtual machine.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...