Cresswell_d Posted December 5, 2008 Report Share Posted December 5, 2008 right i have snapped my maggie body and i have a spare one but there is a problem with the spare one,when i pull the leaver it dont go back where the lever starts. (it feels like there is no spring.)any thoughts on what it could be?please help!!thanksdaz Quote Link to comment Share on other sites More sharing options...
Ravemonkey Posted December 5, 2008 Report Share Posted December 5, 2008 Im guessing you checked to see if there is a spring in there If there is it may be the piston is slightly too big for the casing I had a similar problem with a old hs22Im not sure if this is the correct thing to do but first I oiled it then if it still doesn't work, VERY lightly sand the piston just to get a fraction of a mm off then oil it again and see if it works Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 5, 2008 Author Report Share Posted December 5, 2008 Is there any one who lives near me who is a bit of a expert with maggies, cos I dont like to mess around with them. (cos i dont to f*ck up when im doin something)I live in Kirkby In Ashfield (in Nottingham)please responddaz Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted December 5, 2008 Report Share Posted December 5, 2008 You did bleed it when you replaced the body, right? Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 5, 2008 Author Report Share Posted December 5, 2008 well bleed it with water lol Quote Link to comment Share on other sites More sharing options...
davey1991 Posted December 5, 2008 Report Share Posted December 5, 2008 Is there any one who lives near me who is a bit of a expert with maggies, cos I dont like to mess around with them. (cos i dont to f*ck up when im doin something)I live in Kirkby In Ashfield (in Nottingham)please responddazim from bingham, neer nottingham if you need some help Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 5, 2008 Author Report Share Posted December 5, 2008 yeah that would be a help what are you doin sunday or monday?have you got any spare parts as well (just in case i need them)i know i shouldnt say this on nmc but ill sort a bit of cash out if i need any bits off you (thats if i need them)my msn address is cresswell_d@hotmail.com so email me or add me on msnthanksdaz Quote Link to comment Share on other sites More sharing options...
davey1991 Posted December 5, 2008 Report Share Posted December 5, 2008 yeah that would be a help what are you doin sunday or monday?have you got any spare parts as well (just in case i need them)i know i shouldnt say this on nmc but ill sort a bit of cash out if i need any bits off you (thats if i need them)my msn address is cresswell_d@hotmail.com so email me or add me on msnthanksdazif it has all the internals you wont need anything, i'm free sunday if thats any good. Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 5, 2008 Author Report Share Posted December 5, 2008 well i think its all there (and i have a old type of lever with 2 bits and body) where about would you wanna meet? and what time?i have to get the bus cos i dont drive.do you want me to bring the whole thing or jusy my body and the lever?daz Quote Link to comment Share on other sites More sharing options...
davey1991 Posted December 5, 2008 Report Share Posted December 5, 2008 well i think its all there (and i have a old type of lever with 2 bits and body) where about would you wanna meet? and what time?i have to get the bus cos i dont drive.do you want me to bring the whole thing or jusy my body and the lever?dazjust bring the lever if itsthe same problem as mine its aquick fix.meet in bingham lol? Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 6, 2008 Author Report Share Posted December 6, 2008 well im not too sure how to get there lol im at work today and tonight so i cant keep jumpin on t.f.if you want to meet in notts about 5 ish that would be goodmessage backdaz Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 6, 2008 Author Report Share Posted December 6, 2008 hi mate i cant do tomoz cos i need to go to work ill try and sort something out next week if that okdaz Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted December 6, 2008 Report Share Posted December 6, 2008 MSN was created for a reason guys. Any luck with the Magura? Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 6, 2008 Author Report Share Posted December 6, 2008 nope no luck just yet Quote Link to comment Share on other sites More sharing options...
Cresswell_d Posted December 8, 2008 Author Report Share Posted December 8, 2008 (edited) Hi every one whos have replyed to this!Just to let you all know i have sorted out my brake. (My friend gave me his spare of a spare.)Thanks for all the help!Daz. Edited December 8, 2008 by Cresswell_d Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.