Julius Czar Posted November 9, 2008 Report Share Posted November 9, 2008 HiI got some heatsink cousts about a week ago and there wearing down quite quickly.ive got a grind, but it isnt that heavy. Also my mate has got some and he has got a hevier grind than me, and his have barely worn downhas any one got any ideas as to why it is wearing so quickly?thanks Kiwi. Quote Link to comment Share on other sites More sharing options...
danny mills Posted November 9, 2008 Report Share Posted November 9, 2008 (edited) they might just be bedding in with the grind it should stop. Edited November 9, 2008 by danny mills Quote Link to comment Share on other sites More sharing options...
Rumplestiltskin Posted November 10, 2008 Report Share Posted November 10, 2008 Do you mean wearing down unevenly, or wearing down all over? If it's uneven wear check that you've got the pads set up so they're hitting the rim square on. If they're set up at an angle (toed in for example) then the front's going to start wearing much quicker than the back. Quote Link to comment Share on other sites More sharing options...
Julius Czar Posted November 10, 2008 Author Report Share Posted November 10, 2008 Do you mean wearing down unevenly, or wearing down all over? If it's uneven wear check that you've got the pads set up so they're hitting the rim square on. If they're set up at an angle (toed in for example) then the front's going to start wearing much quicker than the back.Ah, that might be why i'll check. But ive got evo 2's and whenever you tighten them, the cylinders move at an angle, which makes it impossible to align them properly. Bit annoying.Im getting a rulong soon so i wont have to live with it for that long till i can use 4 bolt mounts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.