Spokes Lengths

[Jimmy_c]

Right trying to find out what spokes length i need. Ive used the search and found how to work it out using a spoke length calculator etc. But now iam stuck, iam not sure how to read the table that it shows

I have a hope pro 2 rear hub and a try-all rear rim (47mm wide) The ERD of the rim is 542,

Could some please have a look

http://www.wheelpro.co.uk/spokecalc/

thanks

James

[JonMack]

Well it's simple really. R = Radial, 1x = 1 cross, 2x = 2 cross, etc.

As it's a rear wheel, I'd suggest 3x, so non drive side = 258.6 and driveside = 257.9. They'll probably be rounded to 258 on both sides.

(I put that the rim/hub are 36h, if they're 32, then will be 262's both sides.

[Exstionhead]

Right trying to find out what spokes length i need. Ive used the search and found how to work it out using a spoke length calculator etc. But now iam stuck, iam not sure how to read the table that it shows

I have a hope pro 2 rear hub and a try-all rear rim (47mm wide) The ERD of the rim is 542,

Could some please have a look

http://www.wheelpro.co.uk/spokecalc/

thanks

James

a normaly get all my spoke lenghts from dt swiss

262 both side for the normal pro 2 135mm

262 drive side 263 disc side on the pro 2 trials

They both 3 cross hope that helps you out m8

[Jimmy_c]

a normaly get all my spoke lenghts from dt swiss

262 both side for the normal pro 2 135mm

262 drive side 263 disc side on the pro 2 trials

They both 3 cross hope that helps you out m8

Super thanks for that!

James