CZARKID Posted September 5, 2008 Report Share Posted September 5, 2008 hey, i need some advice on servicing a profile mini cassette hub. has any one got any advice. any help would be greatly appreciated.thanks in advancealex Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted September 5, 2008 Report Share Posted September 5, 2008 Pretty easy really Take the wheel out, and remove the fun bolts + washersPull the driver (bit with the cog on) off the axleGive the teeth a clean, ideally with a toothbrush or a rag. Remove ANY! shards/chips/swarfs of metal in there as this causes skipping!Next clean the pawls and springs (if you're that anal) with a rag and remove any shite. You can take them out by sliding them upwards and the same with the springsThen put them back in. If it helps take 3 sets out and leave one in, so you remember which way round they all goOnce re-assembled, slide the driver back on and give it a gentle push+rotation to get it to sit rightDONE Quote Link to comment Share on other sites More sharing options...
CZARKID Posted September 5, 2008 Author Report Share Posted September 5, 2008 thanks mate Quote Link to comment Share on other sites More sharing options...
eskimo Posted September 5, 2008 Report Share Posted September 5, 2008 A bit of 3 in 1 oil works a treat on the ratchet. But avoid using to much so it doesn't get into them bearings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.