Jump to content

How To Bleed Hs33


langey

Recommended Posts

Hello, if you take of the two allen keys bolts and get the bleeding tube and push it out unitl water comes out the other one and what you using water or oil? if oil only one bolt, Hoped i helped, Aaron.

Not quite sure what you mean, but whether you are doing a water or oil bleed you always undo both bleed bolts on the lever and slave cylinder.

Link to comment
Share on other sites

You want to open both bolts, QUICKLY put the tubes on each bleeding port, then you push the oil through.

The absolute best way imo for oil bleeds is using two syringes. If you put a tiny bit of fluid in one syringe, and enough to do a complete brake and a bit more in the other, you can push/pull the oil all the way through. Then when fresh oil starts coming into the syringe with the old oil in, it will have fresh oil in and no air. You can watch the air come out in the syringes too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...