Ladd Posted August 28, 2008 Report Share Posted August 28, 2008 Rite got my new wheel back of tarty. (it was being built there:) ), and ive just come to put it on my forks. and the wheel was fine at first.. took the wheel out to put a new tube in.. then i put the tube in pumped it up.. put the wheel back in and now the wheel has some play in the bearings.. Help?Echo non disc hub Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted August 28, 2008 Report Share Posted August 28, 2008 if the barings are full in the hub then they have died, you sure your wheels in dropouts properly? and fully tight?Matx Quote Link to comment Share on other sites More sharing options...
mr_malcolm Posted August 28, 2008 Report Share Posted August 28, 2008 if its and unselaed hub then the cones have probably just come lose, theyre normally a 15 mm spanner just nip them back up, just dont do it to tight, just enough to stop the movemetn but let the wheel spin easily without feeling notchy Quote Link to comment Share on other sites More sharing options...
sstein Posted August 29, 2008 Report Share Posted August 29, 2008 the deng front hubs come with washers that go between the bearings and the dropouts, make sure yours are in the right place as it sounds like they are not. Although deng hubs are shit, the bearings in them are fine and will not have broken after only a few rides. Quote Link to comment Share on other sites More sharing options...
JonMack Posted August 29, 2008 Report Share Posted August 29, 2008 Like i said on msn, vxb.com for bearings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.