Muel Posted August 29, 2008 Report Share Posted August 29, 2008 I didn't actually, I copied Inur's GU. I didn't see that until after I made mine, which was after Josh Greenan had already owned it and sold it. Quote Link to comment Share on other sites More sharing options...
basher Posted August 29, 2008 Report Share Posted August 29, 2008 Hey!Got you a picture as promised, qualities not amazing as all i have is my phone at the minute Thats with my BB7 on there, it's a rear 203 mm mount but for some reason it only seems to fit a 155 rotor so i've had to space it out, looking at the way the disc mount is layed out on the megamo, it does seem to be rather different to the new deng/koxx/etc frames, anything else then feel free to Pm me Adam.Edit: That +20mm adaptor is the right way up, right ?its upside down is the adaptor. the mount on the frame is proberly set at -20 like koxx frames i think, So bigest rotar will be a 180 you can use. mechanical brakes dont think have proved to be as good on the back as they are on the front so a hope 180 with 203 adaptor should be plenty powerfull or even a 160. Dont no if thats any help. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted August 29, 2008 Report Share Posted August 29, 2008 As far as i know the mount isn't +20 or -20, don't like hopes, BB7's may be a pain in the arse but i prefer them to hopes and stuff. Quote Link to comment Share on other sites More sharing options...
Muel Posted August 29, 2008 Report Share Posted August 29, 2008 Koxx frames are +20, or the Hoesel is anyway, you have to use the same calipers front and rear, and 160mm rotors.Fork mounts are +20 as standard by the way. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted August 29, 2008 Report Share Posted August 29, 2008 Haha, Great succes Quote Link to comment Share on other sites More sharing options...
Muel Posted August 29, 2008 Report Share Posted August 29, 2008 Is that your front wheel? Sorted! Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted August 29, 2008 Report Share Posted August 29, 2008 I didn't actually, I copied Inur's GU. I didn't see that until after I made mine, which was after Josh Greenan had already owned it and sold it.Do you work for onza? lol Quote Link to comment Share on other sites More sharing options...
JonMack Posted August 29, 2008 Report Share Posted August 29, 2008 Quote Link to comment Share on other sites More sharing options...
Muel Posted August 29, 2008 Report Share Posted August 29, 2008 Haha, well done anal! I'll accept that I got roasted there. No, me and Inur discussed it via PM for a while before I designed mine, his had a slot for the axle, I decided to use a hole so the whole mount slid to tension the chain, but keep the disc and caliper in there optimal position for maximum braking potential.Even though the escence of the design was someone elses, I have managed to change it just enough so I can copyright it and rape the original designer should they try to market it. I SHALL BE ALL POWERFUL! Quote Link to comment Share on other sites More sharing options...
J Trials 31 Posted August 29, 2008 Author Report Share Posted August 29, 2008 Haha, Great succes Isn't that Mark Kings old Megamo? Looks good. Was thinking about getting that, but need a more comp style bike before the streety style. Depends. Got some new brake pads today. Will see how they work before going crazy with the disc thing. Don't think the pads are going to make that much of a difference, but I hope they do. If just to save money. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted August 29, 2008 Report Share Posted August 29, 2008 Isn't that Mark Kings old Megamo? Looks good. Was thinking about getting that, but need a more comp style bike before the streety style. Depends. Got some new brake pads today. Will see how they work before going crazy with the disc thing. Don't think the pads are going to make that much of a difference, but I hope they do. If just to save money.Yeah it's Mark/Jons old one, can't wait to gte it up and running, and to respray it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.