nicks Posted March 19, 2008 Report Share Posted March 19, 2008 Hi all, i was wondering if when i get my front disc brake i could fit a echo cnc brake lever by bodging it.Thanks Quote Link to comment Share on other sites More sharing options...
spartan Posted March 19, 2008 Report Share Posted March 19, 2008 Yeah like you could mount it i think if you hook it up right but the bigger question is will it feel like crap.Its a good question u should try it out, you got nothing to loose but a bleed either way. Quote Link to comment Share on other sites More sharing options...
Muel Posted March 19, 2008 Report Share Posted March 19, 2008 You could do it, but it would be shite as the piston in a deng lever, (or maggy lever), would be bigger than in a disc lever.Also it would be a closed system, so you'd constantly be fiddling with the TPA, and it wouldn't be very powerful. Quote Link to comment Share on other sites More sharing options...
nicks Posted March 19, 2008 Author Report Share Posted March 19, 2008 Okay thanks guys. Quote Link to comment Share on other sites More sharing options...
Jamie_Neal Posted March 20, 2008 Report Share Posted March 20, 2008 I did run a magura louise disc with an HS33 lever and it worked fine without fiddling with the tpa too much. I also didn't notice any loss in power. I think if i'd used it for anything other than trials, the tpa issue may have been more of a problem as the fluid heated up.The other thing to be careful of is what oil you bleed it with as HS33s only like mineral oil - not sure about denguras though.Cheers,Jamie Quote Link to comment Share on other sites More sharing options...
nicks Posted March 20, 2008 Author Report Share Posted March 20, 2008 ok guys thnx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.