Alex Dark Posted March 7, 2008 Report Share Posted March 7, 2008 (edited) Building a wheel for a friend ( echo rim (26") onto t-rpo hub...does anyone know the spoke sizes for it, or just the diameter of a t-pro hub ......Going to be using this spoke calculator: http://www.wheelpro.co.uk/spokecalc/i know the erd of the echo rim (543mm), and i know i dont want it dished to either side ( so both sides will be uniform length spokes, therefore making the build easier )Can anybody help? Edited March 7, 2008 by Alex Dark Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted March 7, 2008 Report Share Posted March 7, 2008 Hub: 45mm flanges, 27mm offset.If it's an Echo 07 rear rim the ERD is 534mm. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted March 7, 2008 Report Share Posted March 7, 2008 Do T-Pro hubs come in 135mm spacings then or is it for a Mod-stock ?? Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted March 7, 2008 Author Report Share Posted March 7, 2008 24/7 holroyd mod-stock....Does this look right?Wheel geometry Hub diameters : Left = 45, Right = 45 Hub offsets : Left = 27, Right = 27 Rim diameter : 534 that'll give me 259.18 long spokes on drive and non-drive Quote Link to comment Share on other sites More sharing options...
CC12345678910 Posted March 7, 2008 Report Share Posted March 7, 2008 (edited) T-pro hubs are supposed to be 110mm but mine must have been oversize because i had to replace to locknuts on the cones (i put thin ones off a front wheel on) so I could fit cams on my echo (mod). Edited March 7, 2008 by CC12345678910 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.