Daborn Meister Posted February 25, 2008 Report Share Posted February 25, 2008 Hi,I'm trying to give my bike a new paint job/get a shop to do it But my stickers just wont come off.My bike is a Da Bomb Schoole and must have has the stickers on for about 2 years now.Any tips on getting them off?Joe Quote Link to comment Share on other sites More sharing options...
Rich J Posted February 25, 2008 Report Share Posted February 25, 2008 If they aint under laquer, use a hair dryer to melt the glue, should peel off. Quote Link to comment Share on other sites More sharing options...
ogre Posted February 26, 2008 Report Share Posted February 26, 2008 white spirit + rags to get the glue residue off Quote Link to comment Share on other sites More sharing options...
timmorley Posted February 26, 2008 Report Share Posted February 26, 2008 Use a paint stripper heat gun jobby to get the sticker off then do the below to get the glue off if white spirits not strong enough get a bit of petrol on it white spirit + rags to get the glue residue off tim Quote Link to comment Share on other sites More sharing options...
Scott Norman Posted February 26, 2008 Report Share Posted February 26, 2008 Da bombs are under laquer but how go you get laquer off?? As i have wanted to get my sticketrs off for ages now Quote Link to comment Share on other sites More sharing options...
kristov Posted February 26, 2008 Report Share Posted February 26, 2008 (edited) Da bombs are under laquer but how go you get laquer off?? As i have wanted to get my sticketrs off for ages nowTry get a stanley knife under the laquer and under the stiker. p.s make sure that the sticker is nt actualy paint. Edited February 26, 2008 by kristov Quote Link to comment Share on other sites More sharing options...
jizz123 Posted February 27, 2008 Report Share Posted February 27, 2008 well if your repainting your bike it dont really mater if its got lacquer on just sand the hole frame down to bare metal as you will need to primer it any way.while you are sanding it down the stickers should just come off. just bare in mind that sanding your bike down could take ages. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.