Conor the basher. Posted January 2, 2008 Report Share Posted January 2, 2008 Yo all.Right i have a set of echo cnc cranks with tensile bash and atomz 16t screw on sprocket, basically i want to get the sprocket off so i can put it on my new tryalls.I have tried wrapping it in a chain whip and putting it on a vice then using a mallet to hit the crank arm with but no luck Any other idea/techniques ? cheers Conor. Quote Link to comment Share on other sites More sharing options...
Adam-Griffin Posted January 2, 2008 Report Share Posted January 2, 2008 http://www.trials-forum.co.uk/forum/index....p;#entry1404318Any good ? Quote Link to comment Share on other sites More sharing options...
James Quigley Posted January 2, 2008 Report Share Posted January 2, 2008 here Wiki Quote Link to comment Share on other sites More sharing options...
JoNnY__Mc Posted January 2, 2008 Report Share Posted January 2, 2008 (edited) Choose either method, let us know how you get on 1) Heat it up abit, and get a long hollow metal pole and slot it over the crank and use it for more leverage 2) Altnatively heat it up and hit it harder?3) If you don't have access to a heatgun/blowtorch, put the crank in the freezer over night and either use your first method or the extra leverage method (Or follow them links) Edited January 2, 2008 by JoNnY__Mc Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted January 2, 2008 Report Share Posted January 2, 2008 go find a hollow pole and just turn it Quote Link to comment Share on other sites More sharing options...
Conor the basher. Posted January 2, 2008 Author Report Share Posted January 2, 2008 go find a hollow pole and just turn itdone and dusted Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.