stevenjenkins.klb. Posted December 6, 2007 Report Share Posted December 6, 2007 After fitting a bashring to my try-all cranks and freewheel i went to put it back onto my bike and when i tightened up the bolt the crank would not move because the inside of the freewheel was hitting the bottom bracket cup but it moved freely when the bolt wasn't fully tightened. I was thinking that it was because my bottom bracket axle was to short can anybody tell me if this is rite? Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted December 6, 2007 Report Share Posted December 6, 2007 Sounds about right yeah. What length do you have at the moment? Quote Link to comment Share on other sites More sharing options...
stevenjenkins.klb. Posted December 6, 2007 Author Report Share Posted December 6, 2007 Sounds about right yeah. What length do you have at the moment?i'm not sure what size it is as i've never had it out of the bike but it is a try-all one if thats any help. Quote Link to comment Share on other sites More sharing options...
basher Posted December 6, 2007 Report Share Posted December 6, 2007 Thought tryall only did a 128, well what you need is a 128/127.5 lenght bb thats the longest available so will fit fine. Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted December 6, 2007 Report Share Posted December 6, 2007 i'm not sure what size it is as i've never had it out of the bike but it is a try-all one if thats any help.Coolio, Try-All do a 118, 122.5 and 127.5 - you'll need a 127.5mm or longer to clear a freewheel and a bash Quote Link to comment Share on other sites More sharing options...
stevenjenkins.klb. Posted December 6, 2007 Author Report Share Posted December 6, 2007 orite thanks for your help i'll try and swap mine for a longer one on here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.