Alex.loves.boys Posted October 11, 2007 Author Report Share Posted October 11, 2007 Hi Alex,Thanks for the video, good idea that. Right i now see the problem. Admitly at the end of the video when you had the axle spinning it sounds like bearings where moving too and not happy.On the drive side, is it possible to fit it in a dropout, say the non drive side of the frame so you'd do the bolt from inside the frame. Ie: looks like you have 1 staberliser wheel.If so do it and do the bolt up mega tight. This should hold it nicely so you can then undo the non drive side.I don't know how you've let it go like it has. Some grease on the threads of the bolts will not go a miss next time as this should help them come off easyer.Davejust tried that no luckjust did the same :@someone save me? Quote Link to comment Share on other sites More sharing options...
Caleb Posted October 11, 2007 Report Share Posted October 11, 2007 did you read my post?you tried holding the opposite axle end with mole groips then turning the stuck allen key bolt with said 8 mm allen key? Quote Link to comment Share on other sites More sharing options...
Alex.loves.boys Posted October 12, 2007 Author Report Share Posted October 12, 2007 (edited) did you read my post?you tried holding the opposite axle end with mole groips then turning the stuck allen key bolt with said 8 mm allen key?just been trying and i cant do itnothing ive got will gripi dont have mole grips but il try get some.. Edited October 12, 2007 by alext Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.