Jump to content

Brake Bleeding


Jsy ben R

Recommended Posts

Ill just give you some tips if you want to bleed it with water used deonised water ( i think ) used for iron because there is no mineral in it or you can use baby oil wich is also good between water and magura blood. And to make your bleed easier do it in a bath full of water so there will be no air in your brakes ;)

Good luck

Link to comment
Share on other sites

Ill just give you some tips if you want to bleed it with water used deonised water ( i think ) used for iron because there is no mineral in it or you can use baby oil wich is also good between water and magura blood. And to make your bleed easier do it in a bath full of water so there will be no air in your brakes ;)

Good luck

My syringe bleeds with normal tap water are always better than bath bleeds i try and do. Not to mention being easier and quicker.

Link to comment
Share on other sites

i got bored at work the other day and thought im goin to bleed my breaks....

i had nothing there, no bleed kit, no nothing and i drained the old fluid out by undoing the bottom bleed hole and pulling the lever, till all the fluid is out.then put you're magura underwater, take off the other bleed screw and (keeping the magura under water) put you're thumb over the lever bleed hole and pull the lever in, as you go to release the lever take you're thumb back off the hole. keep repeting this till there is no more air coming out of the bottom bleed hole. then replace the bleed screw's (with the whole break still under the water)

hope this help's u.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...