Tom3bar Posted September 29, 2007 Report Share Posted September 29, 2007 Hello,I;m about to buy a new bike (finally ) and i wonder about the clearance between the Pure\Czar crank and rear brake (HS33 \ Dengura)...?Appreciate the help,Thx Tom. Quote Link to comment Share on other sites More sharing options...
Joe Papasnap Maher Posted September 29, 2007 Report Share Posted September 29, 2007 Ive had both...and its VERY close..3-4mm.If you run your brake calipers sitting out quite far you might have some issues.. Quote Link to comment Share on other sites More sharing options...
harrylumley Posted September 29, 2007 Report Share Posted September 29, 2007 ive got a zhi z1, 128mm bb and try all cranks when under loads of pressure the catch a tiny bit, like pedaling up a hil really fast. but theyve worn there own grooves into my slaves now so dont do it anymore! probably doesnt help having a cracked and slightly twisted rear end:PHarry! Quote Link to comment Share on other sites More sharing options...
Greetings Posted September 30, 2007 Report Share Posted September 30, 2007 There will be no problems if you run a 128mm BB and a Dengura. Quote Link to comment Share on other sites More sharing options...
The Duck Posted September 30, 2007 Report Share Posted September 30, 2007 Echo external + maggy + new pads + Czar? Quote Link to comment Share on other sites More sharing options...
Jason222 Posted October 1, 2007 Report Share Posted October 1, 2007 (edited) Echo external + maggy Dengura + new pads + Czar? Edited October 1, 2007 by Jason222 Quote Link to comment Share on other sites More sharing options...
Rich Pearson Posted October 1, 2007 Report Share Posted October 1, 2007 On my 07 pure, with an Avid SD Ti, the cranks WOULD NOT clear. Even with the pads locked onto the rim the cranks still hit the arms, hence I'm running an old promax V at the moment and downgrading from an Echo 07 rim (47mm) to a Try-All 42mm in the hope I'll be able to run the avid with this setup. Not sure about the magura setup, but I imagine it'll also be very close.Rich Quote Link to comment Share on other sites More sharing options...
Matthew_Gibson Posted October 1, 2007 Report Share Posted October 1, 2007 On my 07 pure, with an Avid SD Ti, the cranks WOULD NOT clear. Even with the pads locked onto the rim the cranks still hit the arms, hence I'm running an old promax V at the moment and downgrading from an Echo 07 rim (47mm) to a Try-All 42mm in the hope I'll be able to run the avid with this setup. Not sure about the magura setup, but I imagine it'll also be very close.RichSorry to steal the thread, I'm going over to vee wheni get m stock up and running, will I have an issue with clearanced, I'll be running Avid sd5 middleburn cranks, 128mm bb and Echo '07 rim? also brand new pads, mots likely heatsink reds,/snowys Quote Link to comment Share on other sites More sharing options...
The Duck Posted October 1, 2007 Report Share Posted October 1, 2007 (edited) Nah, denguras are a load of arse.Will it really not fit?Edit for those who can't be arsed to read the thread: Soon to be running a 128mm bb on a czar stock, with a maggy... Will there be enough crank clearence? Edited October 1, 2007 by Quackers Quote Link to comment Share on other sites More sharing options...
The Duck Posted October 2, 2007 Report Share Posted October 2, 2007 premature ejaculation bumpGoing to bother me until my frame arrives now... Somebody tell me! Quote Link to comment Share on other sites More sharing options...
nek0 Posted October 10, 2007 Report Share Posted October 10, 2007 Not sure what BB this person's running but even with Dengura it seems very close.http://observedtrials.net/vb/showthread.php?t=30000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.