Jump to content

My Monty =]


El Cristoff

Recommended Posts

how, my mate said blowtorch the snapped bit in the mount, then longnose pliers will get it out

Never even heard that idea/way before!

It depends on how tight/loose the bolt in in there. If it's fairly loose then it'll come out easy. Magnets or a mallet to vibrate it out when it's upside down. Or drill the b*****d.

Link to comment
Share on other sites

By using a blow torch on the magura mounts the heat expands the ally .

ive used this method on cranks to get them off the bb when the threads go....but what i had to do when the bolt snapped in the mount was get a fine drill bit and drill through the center of the bolt then tap in a verry little allen key heat the magura mounts from the side with the blow torch for roughly 30 seconds if that then turn the allen key hey presto the buggers out.....

thats how its done chris

x

dave

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...