trial-biker-ryan Posted September 2, 2007 Report Share Posted September 2, 2007 Hey guys..hs33 2004 leaver,After Taking my brake of bike to bath bleed, iv pushed down the leaver and the pistons just stuck there... Have No Idea about how to go about getting it out..Can some on enlighten me Cheers Guys Ryan Quote Link to comment Share on other sites More sharing options...
Greetings Posted September 2, 2007 Report Share Posted September 2, 2007 Had a similar problem with an '05 lever, flooded it with WD40 and it popped out after about 15 minutes. Quote Link to comment Share on other sites More sharing options...
sapu Posted September 2, 2007 Report Share Posted September 2, 2007 just use a pomp or a compresor.....cover a hole and put some compresed air into the other Quote Link to comment Share on other sites More sharing options...
Ryan Blackwell Posted September 2, 2007 Report Share Posted September 2, 2007 Take the bleed bolt out and push a tiny alen key through the hole that will push it out again mate. Quote Link to comment Share on other sites More sharing options...
SQuiT-man Posted September 2, 2007 Report Share Posted September 2, 2007 I had to take mine all apart, and where the hose comes out push a spoke up inside to push the piston back out. And now I am very weary while bleeding the brake- if both bolts at the ends of the system are closed it's fine for the lever to be compressed and will return, but while bleeding I don't compress the lever fully! Hope that helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.