trial-biker-ryan Posted August 10, 2007 Report Share Posted August 10, 2007 I have lots of stiff links in my chain..how to i go about getting them back to normal and unstiff?Cheers Guys Ryan... Quote Link to comment Share on other sites More sharing options...
Revolver Posted August 10, 2007 Report Share Posted August 10, 2007 basically, get a chain tool and use it to push the pin in and out of the linkthis works, kindathe best way, though, is to ride on it. But i always do the above first to my stiff links Quote Link to comment Share on other sites More sharing options...
eskimo Posted August 10, 2007 Report Share Posted August 10, 2007 Your on a mod i can't see there being any serious problems with it. However WD40 and some play will make it that little bit looser or if you want to do a decent job take apart the links and sand the rust away if that's the problem. Or just replace the links alltogether if you have enough. Quote Link to comment Share on other sites More sharing options...
ilikeriding Posted August 10, 2007 Report Share Posted August 10, 2007 bend the area a little from side to side, should loosen it up Quote Link to comment Share on other sites More sharing options...
Charlie Jennings Posted August 11, 2007 Report Share Posted August 11, 2007 (edited) Edited August 11, 2007 by cjskate Quote Link to comment Share on other sites More sharing options...
sandi Posted August 11, 2007 Report Share Posted August 11, 2007 (edited) Try wd40 and once it has soaked into the links go around the chain and bend all the links in and out one by one and then it should be nice and loose and after that just spray a bit of wd40 all the way round the chain after every wash that should keep it loose and oiledJames Edited August 11, 2007 by sandi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.