thesubway Posted June 26, 2007 Report Share Posted June 26, 2007 Right, i have had my magura mounts on my monty frame helicoiled to M6. All of the holes were pretty much cross-threaded (the frame is about 4-5 years old). So what I need now is some M6 bolts that i can use, i would like them to sit in the magura mount the same as M5's do (in the counter-sunk seating). I will need four M6 x 25 also i would like two M6 x 45 bolts for a booster. If anyone could point me in the right direction for some, or if anyone would be able to sell/send me some i would be very great full. Cheers AdamP.s I'm not sure that this post is in the correct section so could it be moved to correct section if needs be Quote Link to comment Share on other sites More sharing options...
UrbanLegend Posted June 26, 2007 Report Share Posted June 26, 2007 You'll need to drill out your current mounts to allow M6 bolts to fit. Easy job with a vice and a Cobalt drillbit.You can buy M6 stainless bolts in packs of 20 for VERY cheap. I bought 20 recently for less than some shops are selling 4.Both the drill bits and bolts will take you approximately 10 seconds to find on Ebay Quote Link to comment Share on other sites More sharing options...
thesubway Posted June 26, 2007 Author Report Share Posted June 26, 2007 Yeah i have drilled out the mounts ready just need the bolts and wondered if anyone could chuck some my way Cheers Quote Link to comment Share on other sites More sharing options...
Deonn h Posted June 26, 2007 Report Share Posted June 26, 2007 (edited) http://www.stagonset.co.uk/fasteners?outpu...h3F-w#fasteners Ive bought from here comes next day and there ace quality bolts aswell. Edited June 26, 2007 by Deonn h Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.