Front Screw Sprocket

[Pluc]

Hi,

I'm thinking get setup of Echo front screw sprocket and bashring in Adamant CNC cranks.

It has some risk of the sprocket to free screw in back tricks?

Thanks.

[Mike W]

Do you mean your going to run a front fixed sprocket with a freehub on the back ?

Or do you mean to run fixed sprocket on your cranks and your hub ?

if your doing the first one its okay

but i wouldnt do the other or, i doubt you could do alot....

mike

[Boswell]

Look over what you have written it doesn't even make sense.

[jsychem]

In english please.......

[dave85]

Hi,I'm thinking get setup of Echo front screw sprocket and bashring in Adamant CNC cranks.It has some risk of the sprocket to free screw in back tricks?Thanks.

No, it shan't unscrew, all the forces through the sprocket wether you are going forwards or backwards act to tighten it.

Look over what you have written it doesn't even make sense.

I understood it so it can't be that bad.

In english please.......

Consider the name Everton Ribeiro, not English is it?

Now get your head out of your islandic arse and consider that his English is probably considerably better than your Portugese.

[Joe Sheehan!]

Look over what you have written it doesn't even make sense.

Possibly because hes foreign..