N Roach

I am 15 in October Cant wait

Hi guys If i get a Onza 22T Bashring/Chainring will i have to remove my bashguard. P.s i talking about an onza t-pro. Cheers

Yes Thank you Thank you for your time

hi there! I am about to buy the acs claw welded version, and the article says that it can lead to skipping, how much will it skip? Cheers

Cheers guys Thank you for your time I got the cheng shin tube.

Great home video. Good stuff dude. where was that filmed.

Hi there! Please can u give me the URL for a Freewheel remover. Cheers!

Not shore yet hav'nt done it!! Tell you if it was hard. And you'll very helpful to people who have only just started trials.

Hi there! I have just got a t-pro, and i wasn't aware or the freewheel problem. I am changing the drive system, so that the freewheel is on the back. you can get bashrings that screw onto the crank arm (muscleman) from http://www.supercycles.co.uk/site_details.asp?ProductID=402 that is what iam doing with mine also i am putting a 16 tooth freewheel on the back (acs freewheel) from http://www.supercycles.co.uk/site_details.asp?ProductID=327 the ratio for this is 22:16. but also you will need a new chain. Hope i helped!

I am just about to set up a new freewheel and bashring, and im not shore what chain to put with and what size that chain will have to be. Can you help me here? Cheers

Hi there Could it be the bearings?I have the Cane creek bearings. LOL Cheers!

What inner tubes Do you Use on your Mod? Cheers!

Hi guys! I have tried loosening the stem, then tighing the top bolt to perfection but then the headset is to tight and also the little seal has snapped, is that the problem? Cheers Hi guys! I have tried loosening the stem, then tighing the top bolt to perfection but then the headset is to tight and also the little seal has snapped, could that be the problem?

Hi there! Do u live or ride in Poole or have ridden in Poole. Where do you go riding? As i have just started riding trials and would like to know any good places. Cheers

Cheers guys Thank you for your time

Hi there. You can get them off www.selectbikes.co.uk but i would recomend getting the welded version as it will not come loose. Hope i helped

Hi there. My headset for my T-pro is loose and i don't now how to fix it, so i thought i might aswell get a new headset. The headset that is on my T-pro is the "Cane Creek zs", But i cant find that headset. Which headset will fit and what is the seize so that i now. Please help me guys! Cheers

The freewheel is a problem for me, and i think i have found a way around this problem but im not shore if this will work; I was thinking about putting a "Onza Bashring/Chainring Combo (Orbita)" on my Muscleman crank, and then fitt a acsfreewheel "welded version" to my T-pro hub but i dont now what chain will fitt. Can you help me guys Cheers

Hi there. The freewheel is a big problem with the t-pro.

Looks decent!!!!! What freewheel are you using on the chainset. Cheers

Hi there. I have a onza t-pro, the only magor problem with this bike is that the bike uses a front freewheel system which is a pain as the freewheel comes loose after 3/4 days and i have to keep tighing the freewheel. BUT I have just found the "welded version" of the acs claw which will not ciome loose but might slip every now and again. But out of them 2 bikes the t-pro is the one i would buy.

Hi there. I have plazmatic CRM's on my hog rims, and they work a treat for me.

How about "modi"