Tartridge

Not very hard at all... but the whole point of the rims is that there are no un-necessary holes!

Yes - 28.6mm (standard = 25.4, super oversize = 31.8mm)

Yup, all you need then :) Strip down, build back up, should be all good again :)

Same again I think.

Got a manual with it? Should be most stuff you need to know in there... http://www.whiteind.com may also be of use.

I was suprised when we weighed our set at 283g - Im sure an earlier version of them was heavier. But, they are definitely sub 300g now.

I guess you could conclude that - but - how many sets of Echo (or Zoo for that matter) bars have failed? Personally, I think a 'trials' (Alibongo) bike rides strangely with a high rise set of jump/dirt risers on it.

Thats definitely not right - the Zoo stem is a lot lower than the T-Master stem, you can tell from pics alone.

Depends how they measured them - the correct measurement is horizontal, then add the rise (not measuring along the stem itself)

I guess its because the ones in the bar & stem deal were 'Pazzaz', not 'Onza'.

No probs Mark - no chance to measure one... cos we have run out, sorry!

And the other way round!! ;)

Yup - 31.8 clamp... Pics and info here.

Both are 31.8mm clamp... so... i dont see why they wouldnt?!

You need to be working sub-maximally to burn fat/calories though - around 60% :)

I've already loved it many many times :)

Best get in touch with where you bought it :- I would have thought it would be ok if its neat, and it broke in an unrelated place. However, some companies may be very tight about things like this, and just plain refuse. Yep, 1 year materiatls and manufacturing defects :)

Are the cylinders pointing upwards into the rim?

Which model was it? Cheers

Elvaston is just outside Derby, bout a mile off the A6 :wink2:

Try this: Click here, then Right click, save as on the pic :D PS: Got your hoody/T now Matt :P

In the light of the 'bike rider' saga, I wont post my thoughts. Instead i'll thank Jonny for his efforts - from what I can tell, its taken a hell of a lot of time and work to get all that lot done :P Thanks for sharing :P

Half the engagements :P (well, basically) My mate once had a Hope XC and an ACS Claws up front. Oh my word, was awful!

The best bit of that mod bike is the cranks (Truvativ Hussefelts)... and it doesnt even come with them!

Look very nice. Same construction as the old Onza Lite/Fly guys - same dropouts (drilled), disc mount, 'ripple technology' (fly guy) legs, bonded steel steerer. PS: Off to the post office with your wheel shortly :-