Jaffacakes

If its a VW shag wag then yeah they rock

That is the trials eno freewheel with 72ep. The red and blue both have 36ep I think. whiteind.com

no more fire

Oooh don't get me started on T-comps. They are lovely bikes they ride so nicely look lovely and weigh nothing. Perfect if you don't weight much and are so cheap you can afford to replace them every few months because they do tend to snap. Also try not to go to bash guard on them because it goes into the frame .

How come you were in Plymouth Pete. I thought you moved to Bristol like 2 weeks ago?

Can you get it from B&Q?

Echo grips rock! cut the end off with a hot knife you can get your bar ends on. Push them down so they are so tight and you cant get any water in and put a zip tie on the end. They last ages, i have had mine on for about 2-3 months now. They are really gripy and nice and thin as well. I think the worst and best grips i have had are the monty foams they feel so nice and are so gripy, but riding without gloves rips them to shreds in about a day

Is there anything that would destroy the oil on contact without destroying my rotor. Would turpentine or white spirits work?

I would come but I don't want to sit on a train for 12 hours.

Well the reason you get the piss taken out of you and noone likes you is because you never stop going on bout that. If you stop you won't get the piss taken out of you.

Why can't you keep your love of pro's to yourself?

Are you talking to your self now? scitsophrenic(sp) or what

None of its working . My harsh sand paper is completely black, the pads are still as oily and boiling didn't do anything. I think I will have to waste £45 now That's all hope of me getting a new front wheel just because someone thought it would be funny to cover my rotor in oil... Tw**s. It's not even fully warn in yet, thats how new it is

QUOTE(deanie-b @ Feb 8 2006, 08:47 AM) ←if that fails, tap them with a hammer Yep, slowly unscrew the bolt tapping it very lightly with a hammer as you are undoing it.

I would get a tensile if i were you. I have a ENO and its great, it was skiping a bit but I cleaned it out and it dosen't anymore. It feels really solid and the extra engagements make a suprising difference.

Questionnaire 1.Male: Female: 2.Age: 5-12: 13-20: 21-29: 30+: 40+: 50+: 60+: 3.Do you buy/have done in the past Chinese take-away? Yes: No: 4.If ‘Yes’, how often? Daily: Weekly: Monthly: Infrequently: 5.If ‘No’, would you in the future? Yes: No: 9.Would you like the new Chinese take-away to accept other payment methods such as credit/debit cards, cheques? Yes: No: 10.What would you want from this Chinese take-away? Gm, additive: Cooked fresh to order: Selling Drinks: 11.What do you think is acceptable for ‘Set Meal’ prices? For one; £5: £6: £7: £8: £9: For two; £13: £14: £15 £16: For three; £23: £24: £25: £26: For four; £30: £32: £34: £36: 12.Most you would pay for a dish? £3: £3.50: £4: £4.50: £5: £5.50+: 13.What would encourage you to use this new authentic Chinese takeaway? Delivery: Location: Prices: Food range: Food Quality: Decorations: 14.Do you purchase online? Yes: No: 15.If ‘Yes’ how often? Daily: Weekly: Monthly: Infrequently: 15.If ‘No’ why not? Security online: No PC: Prefer to go out and buy: 17. Would you use an online ordering system to order you Chinese food from this new take-away? Yes: No: Maybe:

It is probebly just loose. ACS claws don't usually die that quick. You will find two small holes on the big cover on the back (facing away from you) which says "ACS claw" standing on the drive side of your bike tap them ---> to the right so it will be going around clock wise untill it gets tight. You will need to keep doing this every week or so intil you get it thread locked, welded or buy a ENO EDIT: Grrr beaten to it.

I will go and boil them both now just because it is easy . I only have prety harsh sand paper so would it mess up the rotor? and I haven't got any petrol...

Some tart covered my disk rotor in 3 in 1 lubricant oil and I just can't sort it out. I have tried putting my rotor in the dish washer, going down a hill with it on then covering it in water, I have scrubbed my pads in hot soapy water which cleaned them up nicely but stays like that for about 10 seconds, scribing my rotor for about 20 mins and also attacking it with fire which didn't work. The worst part is that the pads and disk are both brand new . Is there anyway I could sort it out or will I have to replace them?

Let's not

Yeah you need to keep it tight, after about 3 months of having mine I had ripped out the BB threads.

I've just done mine and found it quite easy except for putting a spring in the wrong way around and it having no power... But its all sorted out now. Cheers mark it's a good guide