Will Arnold

if your bie eill fit it then i'd go with a connex wippermann bmx chain (i did) they are huuuuge and inspire confidense (Y) youll been an agnle grinder to get it down to length though......... :unsure:" ta

sweet matey (Y) im gunna do mine in dark blue and off-white i think. you inspired me :unsure: Will

some old marzocchi crowns(with the bolts to hold the stantions in), some carbon tubes and the bottom of an old pair of sussers chopped up for dropouts. just as good....... :unsure:" Will

nice one, I LIKE IT! :unsure: Will

ur either young or a complete nutter (Y)

14 :unsure:

gosh! look at how diddy the headtube is :unsure: Will

or doesent spin around because of the extra springs :) (Y)

boiling hot water (Y) and maybe try and clamp the cog down to a workbench or table and then put a scaffold pole on the crank arm ;) do you need to keep the cog in good nick? if not then put two flat sides on it and chuck it in a vice. Will

that guy on the bike that nearly made the roof must have hurt himself, (Y) cool selection there ;) Will

i meant that 30 riders would be a more comfortable amount. 60 was too much i think. Will

i dont think he means theres a problem with it, he said that because now knows its the t-mag, a late 'click' if you like (Y) ;) Will

so how much weight does this actually save and what happens if you get latex on ur rear rim?!?! youd be on ur arse me thinks! it all seems like a lot of hassle for those times when it rains nails and that guy from the video come up to your bike and stabs nails into the tyres ;) convince all of us that are jubious! (Y) Will

Im Will(kind of obvious, lol) i will be riding a grey t-pro with mostly black (Y) parts and a gold front hub. 30 riders will be a good turnout i think ;) Will

i think thats wrong, if its 45 + or 45- then itll make the 'snakeskin' effect but if its 45 degrees the itll be the same both ways(from the angle youve drawn your diagram i think thats right, lolol. Will

grant, your drawing is wrong (im prettey sure!) because surely 45 degrees to the rim would make it its sharpest. if you have it at 90 degrees to the rim then itll just be the top of the disk hitting it(which is flat, not pointy) get me? or am i making no sence (Y) Will

cheers guys, that was great ;) (Y) Will

i doubt anyone would mind the 50p increase in entry :turned: as for this meeting, tom, will you be riding beforehand as pete and i are thinking of coming over at ~ 2ish ~ i think craig will e out at about 4:30 cheers, Will

stone cutting has worked best for me :- ive used grinding disks but they seem to give a smooth grind :turned: anybody used a diamond cutting disk? i've got one in my shed and i dont know whether to try it. cheers Will

yer, thats the angle in looking for :) i've found out that the distance between tabs is 51mm. still need to find the angle :turned: Cheers :- Will

here is a picture of what i mean. http://www.trials-forum.co.uk/forum/index....cmd=si&img=6768 as you can see there are loads of different combinations. anybody know the actual angle? im sure its not 90 degrees, it seems wrong anyways... cheers. Will

the best pads i have used so far have been plazmatic crms, they are stupidly good :blink: (ive tried koxx bloxx, heatsink blues, megamo, monty) i run a medium grind. Will :angry:

i need some info about rear disk tabs. can somebody please tell me the distance between the holes of a disk mount and also the distance they need to be away from the axle centre. i also need to know the angle of the disk holes relative to the axle. cheers. Will

yeah, i have psp and know how to do it now :blink: cheers. Will