Onza Kieron

I have been right foot forward as long as I can remember and sidehopped to the right but asfter 3 years of trying found I could still only get bout 12 inches but afer trying to the left I found it harder at first then after bout 3 month i can get 26 inches. Moral of the story is try to change the way you ride even if you feel uncomfortable at first you may be suprised. A shorter version: Possibly doomed! Kieron :lol: *phew*

I agree with both of them, It's a small difference that you'll be used to in 2 days and you'll have stupid good power. Kieron (Y)

I made a booster and a bash that worked well, when i can get hold of a welder i'm gunna do project frame which should'nt be too hard as i can just cut the bb and head tube off apollo's or the alike to get correct diameter. Kieron

Yet another vote for Limewire. Kieron (Y)

Hmmm, my latest is running a piece of sheet steel across the mech hanger, cutting my mech up (if you saw it you'd understand), no headset just rode around normal without one (Y) Thats all for now, Kieron

I would say Monty (Y) Zona's are still good enough though, i heard rumors somewhere was doing them for £160 Kieron (Y)

Bump because I also really wanna know too.

I'm still young, 14 and lovin it, old enough to do things, young enough to not get into trouble. Happy birthday though, Kieron (Y)

I have done this and i wish i hadn't it isnot as reliable, don't go there, just get a Sora or a Tigra mech and your sorted, will get pictures in a few mins. Kieron :angry:

Don't know about those pads but some of those Viz! parts are looking very bling :- Kieron :)

Suppose, I'll post a pic up when done, bet i can get it shinyer than yours prawn :- lol(waits for a shinyness battle to begin), cheers for the replies everyone. Kieron :)

Is this because you've just bought a Zona Zip and then the Zoo!'s have gone cheaper than chips. Kieron :)

Would it be possible to have an internals pic or is it not allowed yet incase other companies copy. Kieron :blink:

Thankyou for the replies but also, do i really need to strip past the bb/seatpost area as i dont really want to, will it make that much of a difference. Kieron :blink:

Yea, go for it, bigger is always better in almost any way, cept ladies :P :S Just make sure your forks will be able to handle the powerfulness. Kieron :blink:

Ok thankyou people, can be locked now. :P Would make a good FAQ if anybody could be bothered. :P Kieron :S

I'm wanting to polish my T-Rex frame so its all chrome :P . I know i will need paint stripper but what do i do, strip the frame with Nitromors up to the BB then polish and lacquer or strip to the BB then lacquer then polish? I'm in a bit of a pickle so any help appreciated, Kieron :S

I see you like 24" bikes, i personally think they are bike BMX's and look weird when put up against nearly every other trials frame, I didnt mean to be nasty :( Kieron :)

Hi Steve, I certinally would not mind testing some pads for you, I've been meaning to buy some blues for a while now but I'm really short on cash after my forks passing away. I ride a Hog rim with a Stanley Knife grind and currenty running some of your clearance Honigs which are really good in the dry but seem to sometimes work in the wet and sometimes don't, anyway it's your choice and I would try to write a detailed explanation as possible. Thanks, Kieron :(

Buy Buy Buy, If it's as good as the T-Rex then it should sell out, not too sure bout any of Onza's colours but that is only cosmetic, if you want a 24" and dont want to look weird(sorry) then this is the bike for you. Kieron (Y) (Y)

I have the normal Deore one and it does me fine, i run it with a Jagwire cable and Shimano DX lever. Kieron (Y) (Y)

I put a mini grind on my Deore Rotor with a Stanley knife, works too. Kieron :lol:

Alright mate, I'm from durham, There's about 8 of us in Durham, 4 in Newcastle and I've seen a few peole riding Sunderland, Add me ridehardorelse@hotmail.co.uk Maybe organise a big ride sometime. Kieron :lol: :lol:

:P Is the Uni where you go up that long road and it has walls with round edges? KIeron :-

There should be bearings in both sides, thats the way my mates wheel came on his DDG. Once you have put the BB's in it will bring the cone furtherout therefore fitting :P . Good Luck Kieron :- I also stopped my hub from slipping by taking the freehub apart and cleaning and bending the spring. :lol: