AdamR28

Yes. But you can't get the Inspired one separately.

Indeed. No amount of moaning would do the job.

It will work, but you'll need an additional 1-2mm spacer between the disc side of hub and the frame.

3/8"

Yeah, been over that a couple of years ago, still have the proto set of cranks somewhere...

Hollowtech 2.

If you need a stem without a top cap, just give us a call. Stem: low = bad

Indeed. Annoying.

ISIS Middleburns are discontinued - and have been for a good year or so - it's likely they aren't in stock.

Things you need: - A good, solid vice bolted to a solid bench. - A LONG bit of bar, at least a metre. Things you don't need: - Heat: the alloy crank arm would expand more than the steel freewheel, so that will actually lock it more in place. Follow the guide and it will come off - make sure you are going the right way!

It's definitely the chain wrap.

Awesome vid Jonny Barrow Farm looks amazing, clearly lots of work put in!

Tuesday THE 14th OF February. I love it when people advertise to the world they don't have a complete grasp of the English language!

Sounds normal to me.

This sort of thing: http://www.tartybikes.co.uk/hub_spares/vz_axle_end_caps_pair/c22p10954.html

Were these bedded in and set up properly? Any brake can feel mushy with a poor setup and not bedded in (the pads firm up with use).

https://www.google.com/search?q=pashley+trials+frame&oe=utf-8&rls=org.mozilla:en-GB:official&client=firefox-a&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N&tab=wi&ei=MDkkT7bdDMXY8QPj16izBw&biw=1280&bih=903&sei=MTkkT6rVHYmq8QPFlMCNDA

Threadlock to both.

A thinner chain, like Z610HX will do the job there. That's the easiest/cheapest solution anyway

Hits chainstay or seatstay? Which exact chain, rear hub and rear sprocket, cranks, bb, bashring/plate?

Sounds like a plan! Tut, you are both cheating then

Me too! Won't have time for a few weeks now though Do you two play with a pad or wheel?

Do you mean chain whip? Either way, that won't work - the technique in the video is the easiest.

http://www.tartybikes.co.uk/media/guides/maintenance_freewheel_and_sprocket_removal/m1.html

See if it would work, make it about 25% lighter.