The dab

Has the master piston expanded over time? Could be to do with the issue of slow lever?

I had one that cracked while installing with a torque wrench got a new replacement straight away and was fine installing with the same torque wrench 🤷‍♂️

Watch the back tyre when he gaps off the box

How about the 2009 echo frame? €189 for a new frames not bad either! few old echo controls frames on eBay too

Tried bleeding on bike and decided to take the brake off the bike and bleed it in a bucket of water still felt the same for front and rear brakes Mates all felt the same just a preference thing I guess

Had this for a few months now and it’s a blast

I did submerged water bleeds on mine and even swapped master pistons to alloy and still had the mush got racing line levers and had solid brakes the first bleed

the koxx Marco hoesel edition never liked mods really but these looked

Would any dremel work alleviate/stop any cracking?

it’s a because I had a friend who had one same dropouts and two holes drilled in head tube as his think this model were just named which wheel size they were

Red flag asking for money before starting the job If they were tradesman and setup properly they’d have trade accounts to buy the materials and charge in the middle/end of the job depending on costs/time Atrocious the amount of the cowboys about

If it’s the levers ross sold then they should have alloy pistons as they are my old ones. worst levers I ever had on a bike

Do they still have the alloy pistons in? water bleed or mineral oil? Oil as said should help on the pistons and also check the slaves

Back to street trials last month or so for me bikes amazing I am not

I tried terrex solo years ago on platform pedals and didn’t get on with them well but when I got a bike that came with echo caged pedals a couple of years ago I found my ordinary ribo shoes didn’t feel stiff enough for caged pedals So tried the terrex solo and best shoe/pedal combination I’ve ever had just learnt my lesson and had to buy a new pair half a size bigger than I normally wear for wiggle room(think Adidas sizing is small) and removed the insoles

Satan

Always liked either the trial tech splined crank and ffw or the threaded jitsie 108 the best currently have a clean 135 sealed and the drag is worse because of the bearing seals but obviously no dirt ingress like a open ball one

One up do a dropper post around 210mm or 240mm can be reduced Upto 20mm with shims too https://20twentystore.com/products/oneup-dropper-post-v2?variant=42333518889207