wally

Isn't it still a Koxx? (Y)

I used to only injection mould my plastic backings, but now i am starting to injection mould the rubber pad, will post some pics when are totally finished. Here's what i do: Heat rubber granules in kiln for 4 hours @ 90 degrees, to release mositure which the rubber absorbs, which can effect mould quality as when heated it starts to bubble as mositre evaoprates. Switch on injection moulder, let it warm up for 15 mins. Then purge the moulder to remove any old rubber from moulder and flush it though with new dry plastic. Fill hopper with dry rubber. Insert rubber pad mould into moulder, tighten. And press go. Every 30 seconds roughly. The mould will be released, extract pad from mould using extraction pins to push it out of mould, close mould up and repeat the process over and over again. :P Once pad has been moulded, let it cure and reabosorb moisture. Then put backing into glueing jig, fill with glue, put pad on top and clamp down. Then leave to dry, and again repeat the process thousands of times. The whole process gets very boring after a while, espeicailly when you have done it a couple of thousand times. (Y) I hope some people will find this interesting. :)

But your not though are you. Who can backwheel the bin in town, and who cant. Is one example, we shall bitch on msn later.

AND? No excuse when you have been riding as long as you have. :shifty:

Joe you look so much more controlled on your XTP. ;) You look sort of sketchy on ther mod from that video analysis. (N) Good vid though. :shifty:

:shifty: And to finish off nicely he needed to ask me back to his tent. :rip:"

I had a great time, even though i got all my clothes, food, toothbrush, deoderant, phone, etc, nicked on the first night. Oh and a big stash of brake pads in a bag. Had to spend all weekend in the same t-shirt and shorts. A big thanks to Tarty for letting me borrow his coat when i got cold.

oh my god you have finished it! Looks good apart from seat :S get a bigger a lower seat, and the rear tyre needs to be black. Then you will be sorted. And there is a bike pic thread ^^^^^ above. <_<

I was talking to one of you on msn about coming down, might do in the next couple of weeks after NASS. As it aint that far for me and it is a bit different to where we normally ride. I will bring a few of the other RIM JAM boys too. (Y)

Just listening to Radio 1, and one of the contestants on Staff Wars rides bike trials. :blink: Big cheers in the office. Who is it? Own up please.

Ok sounds good. :(

Are we deffo going Todge? Who is driving?

If you look on the pic of the tartybikes frame you will see it. (Y) Big booster which sits quite nicely on the back.

OOO its horrible, i have never seen a cat dribble that much...... come to think of it, i have never seen a cat dribble. :D And not to mention the stiff hairs on its back which stand on end. :-

Wally - Chris Walford Ben pole - Ben Cole Todge - Arron Rogers Ingram - Jake Ingram >_<

I didnt see it, does anyone want to email it to me, or do i really not want to see it? (Y)

I will come with Todge, but i can only do Saturday. :">

The same happened to my standard T-pro BB when i had it. Did a gap and then i lost drive on one side. Felt real weird in the air.

We will hopefully be arriving in notts, just before 11. Havnt a clue where we are going but i will ring ben if we can find you lot. ;)

Oh ok, never mind, i will still go, never done a comp without rocks. ;)

Might be, i will check and let you lot know later.

I'll be there, and i'll bring Todge and prizes if needed. Always wanted to do a comp that doesn't involve rocks and grass. :P :)

Has some one just watched Austin Powers? :-

What do you mean, they look fine to me? (Y)

Yes i will be there. Am i taking you todge? Or are you bringing Jake?