87Monty

My old setup, 2.2l with 2x 40mm dellorto carbs

About cutting sprocket, last time a old freewheel i had on another bike was stuck and i didnt have the right tool to disasemble it, i just cut it off and rescue the threads, so im careful about cuttin things up, lol.. But i will try to us a vice first and see.. Im not sure if the bearings and seals will handle it, if im heating the sprocket first a bit. I will try without first if so.. Will try to use som wd40 betwen sprocket and hub wall but not sure if it will help ..

I understand what u mean, and it is a fwd dosent make it cooler in my opinion xD im more a rwd guy anyway. Many cool builds out there. throttlebodies on these engines is my favorite. Or carbs.

Yeah.. well im thinking the sprocket is stuck to the sidewall on the hub,cause it is not hard to install on the threads. so maybe it is "welded" there. will try later to get it loose..

Lol

cool, what car did you use it in? iv seen people use it in many types, mini Coopers etc Iv Upgrade it With H-rods,new bearings,underflushing for piston cooling.. etc.. planning to converting it to turbo later,, needs some overbore too,, and lowcomp pistons if so,but not yet. wanna use it first like it is and see if it nessesary with more power.

Yeah those are great,, Opel c20xe (Vauxhall in England)

Here is my other car, building new engine for it..

Its bubbles from the soap

First wash this year and ready for summer,car meetings and cruisin.

Tested a new place today, lol

Tryed to take some pics of the chain, i see now i have use grease on the thread when i installed the sprocket. But dont know yet if it easyer to disasemble if it was without grease.

Here is my new cuddle-machine, got it cheap,but new, i got used to the color combo, At least its metallic, lol.. Now i like it. Upgrade the tires to conti trial king 2.4 front, and 2.4 baron in rear..replaced the handlebar to the old but new one i had, install lighter tubes, took of the rim tapes.

Aha,thats nice, thanks i will try.

allright thanks for advice and info, maybe it is time to service the bike a little and see if the creaking sound will dissappear,, will look more on the sprocket and see if i can get it loose in a vice.

Another monty, magura 218, my brother child driving motorcross trial, actually begins to be good. But now he want a trialbike too,so he can practicise when he cant drive motor trial. Got it cheap and works good., my brother on 38 was jealous so he bought a 219 kamel, lol., he is driving motor trial too.

Hum, sounds not good, where can the thread on the hub be destroyed if so? Under the sprocket when trying to loose it? Is it better to cut it up a bit with a cutter machine grinder and buy a new sprocket? (oh i found out i have an aluminium sprocket on the original rim,if i should change it,) but a bit heavyer, At least the chain dont hit the spokes on the rim,but im just thinking the chain may wear out the tooth on freewheel or sprocket more if its not 100% lined up? At least it works ok like its now, but hearing some "cracking" noises some times,like if you walk on old wood floor, lol.. im not sure if its some dirt between the crankbearings or frame or if its the chain who make it.

I have use this tool, but it was not so expencive so it looks like the chain was poor quality too. I took on a steel pipe to get more power, i took off the chain on the bike first, and try to get it loose when my dad hold the rear brake so the wheel didnt spin. But the chain of the tool get destroyed.. I will try the method that Adam in tartybikes use in same table tool.. Just need to find a better chain to use. Im not sure if i can get it loose just to twist the wheel with the arms. I think i use some grease on the thread when i installed the sprocket btw.

Can`t get my titanium sprocket loose, have destroyed 2 types of Chains,with a long steelpipe for loosing it.. the reason i want it out is cause i need to install a 3mm spacer to get the Chain more lined up..lol.. any tip to a good tool for dissasemble sprockets? its a screw on type.. im scared to destroy the Jitsie aluminum hub or something.

Nice bike and aggressive looks With those tires and rims

looks Nice,like the New color

Comparing eagle claw v1 vs v2 prorace

Knock knock, whoes there? A brand new eagle claw tire!, sticky nice rubber. I need to use that in rear.. Lol Best looking 19" tire in my opinion, i sold my old used one,but i regret..but it was hard old rubber anyway. So nice with a new one.

.

I have black plastidip rubberspray if i want it black one day a spray film it is removable without any problem. The green rim color is much lighter than the pics. Easy to find now in the dark. Lol.. But i see what u mean.