X-Lite_Rider

well only if its a few of us it would be a laugh gimme something to do for a while

I am very board at the moment and wondered if anyone wanted to play abit of counter strike source?

Basically when i go to play half life it says that we strongly recommend you update your drivers. I can play it without them but i feel it may be affecting the quality, when i go to ATI to get the new ones its always- This page cannot be found any ideas? Finally got there site working now what the hell do i want i have a Radeon grapchis card, but i am pritty sure my motherboard is ATI? confused (Y)

Well the fastest service possible, should have it the next day then. (must of cost him quite abit of money :( )

It all depends on who he sent it with really there are loads out there and some are better than others. In my experience you can also pay more money and have it sent quicker e.g. Special Delivery. If you posted back saying who he sent it with then we might be able to help you more. Anyways 3-4 days maybe :(

i currently run the 05magura i switched over from the Old style and too be honest theres not alot of difference magura were boasting about 60percent more power or something but thats rubbish. I standard booster you get with the 05 magura is not all that good buy a RB or something (XTR if you can find one) too me theres not really any difference apart from the tpa in the 05 is less likely to be broken due to crashes etc. The never style lever is nothing to shout about either. Have alook around i would personally buy whichever ones you can find cheaper. http://www.chainreactioncycles.com/Models.aspx?ModelID=6003 Theres the 05´s priced at 99.99 (seems reasonable (N) )

Just stick with the KMC kool my friend, the Rohloff isnt worth that price imo. Everyhting else looks fine even though i might be tempted to put gears on it single speed drives me crazy

Boxing is great if its for the heavyweight champ in vegas and stuff, i love watching them, but amir kahn and that light stuff kinda sucks(dont get me wrongs hes still rock hard) theres nothin worse than seeing boxing in worthing or some other small place in some community centre. :rolleyes:

When were u thinking about going because i think i might of stumbled across something? Flight Details Departs Manchester on Wed 10 Aug at 14:00 local time to Jersey arrives at 15:10 local time Returns Jersey on Tue 16 Aug at 07:20 local time to Manchester arrives at 12:00 local time Adult fare is £52.99 for this return flight and includes taxes and charges. This fare and availablity was checked on 16/7/05 01:45. Please note some fares may have increased or decreased after the flights were last checked. This website does not sell any flights. Fares are provided for information and comparison only. Please book directly with the airline by clicking on the link below. This cheap fare must be booked as two single flights with different airlines. Click here to check fare and book outward flight with bmibaby http://www.lowfareflights.co.uk/Manchester-Jersey.htm Hope that can help you

1.I have actually joined tyke trials but very rarely go. 2. The main reason behind it is transport, i dont have my own car and my parents wont take me. since i am really the own rider near here i also cant catch a lift off people, also usally these places arent near main towns etc so a train is also pritty useless. Hopefully when i learn to drive in 2months (already have car sorted) i will deffo start coming to more. 3. Not really bothered about this, just that i probally wont know anyone there so that may be abit akward at first.

I run a smooth rim and quite frankly koxx blocks arent up to the job, so i went on the hunt for some decent pads on a smooth rim evrywhere i looked zoo came out on tops. I know i should grind my rim but i aint got a angle grinder(terrible excuse i know) also i am hoping that summer wont be a wet one so a grind wont be essential. Should be purchasing my zoo pads in the next couple of days just hope it makes a difference.

Take it off your bike, if it spins smooth your fine if it spins but keeps getting stuck either ring supercycles and tell them this is aceptable becuase its new or buy a new one there only cheap, When i rode with a dodgy ACS it suddenly locked up meaning i asnt going no where and hurt myslef quite badly. The best option is buy a profile

That avid jucy 7 looks very nice indeed but like you said surley 205 rotor for a mod is abit of overkill, how much did you pay for it btw? http://www.chainreactioncycles.com/Models.aspx?ModelID=4792 is that what you have it, it only comes in 203mm which would be fun on my mod. How do you rate it over your marta??

for jail escape how do you find out the key code?

http://www.chainreactioncycles.com/Models.aspx?ModelID=7140 There you go m8 £34.99 6 weeks until re-stock though

1 finger on each brake for me, when i was first starting using v brakes i used to have to ride with 2 fingers on each which is why i probally couldnt gap. If i try using 2 no i struggle so much its stupid i cant even back hop with 2 fingers on the rear :P a few people i know can ride properly with 2 fingers on each but i think its abit pointless becuase it must mean you have less control. :lol:

http://www.trials-forum.co.uk/forum/index....showtopic=52448 Try that topic it you should find some useful stuff on there.

I have been looking around and was thinking about buying the new hope trials disc brake for £130 at the moment i am running a front avid which over the last few weeks has started to slowly keep decresing in power. I was wondering is it worth the £130 for the new hope i have had a hope before and i wasnt really that impressed, i was wondering how the power performs over the avid mech also what its like in relation to modulation etc to other hope brakes which i wasnt too keen on.

my m8 got it done the chip cost £50 then games all cost £4 each

Sorted

positive i am going the right way( the pedal spanner was dead cheap one in these £25 bike kits) i sprayed WD40 over the threads (or as close as i could get) and left it about 45mintues and still no luck. :(

Basically my caged pedals are coming to the end of there life, i went to remove them earlier today got the non-drive side off fine but then i get to the other pedal and it will not budge one bit( and before u say it i am tyring to turn the spanner the right way) i had this problem a while back but thought i would leave the pedal on since it was fine. Anyways i ended up bending my pedal spanner and my other normal spanner got no where i took the outer cages out to get more clearence, didnt make a damn difference any one got any ideas how to shift since it eats my strength for breakfast.

Only 16 at the moment when i pass my test i got my mums old megane(sp) good little first car i would say, condtition could be better like.

bah my mistake :"> :">

I run a profile hub on my monty and love it, i used to the run the ENO freewheel not the trials version i should add and it was fine but i wanted a few more engagement points also the ripping jeans issue was slightly annoying, I decided to get a profile cost me around 210 in total including wheel build and spokes (got a new rim) which isa fair amount but its sure worth it, for the weight issue i can slighly notice the difference since my ENO weigh next to nothing but its not a problem since the engagement points make up for it. If you can afford it go for it. EDIT- you can get a 36 hole 12T driver for £140 special offer on wiggle, seems a good deal